ASTM D566 ISO2176 NFT60102 Dropping Point of Lubricating Grease Tester lubricant melting point analyzer

Dropping?Point?of Lubricating?Grease Tester        ISO2176 NFT60102 ASTM D566

Product model: JF4929A

Product Introduction

This instrument is suitable for measuring the dropping point of grease. The test method of this instrument is: put the grease into the grease cup of the dropping point meter, and under the specified standard conditions, the grease will reach a certain fluidity temperature during the test.

Technical Parameter 

1. Applicable standard:  ASTM D566 ISO2176 NFT60102

2. Temperature control method:  PID digital display thermostat

3. Temperature control: ±0.1℃

4. Heating method: oil bath heating

5. Overall power: 800W

6. Working unit: 2 tubes

7. Power supply: AC220V/50Hz

Main Feature 

1. The glass cylinder is used as a heating bath for transparent observation;

2. One-piece structure, easy to operate;

3. The grease cup is made of chrome-plated brass, the inner diameter is Φ9.92mm, the drip hole is Φ28mm, and the cup height is 12mm; it meets the requirements of ASTM standards;

4. Two samples can be tested at the same time, which is convenient for making parallel samples;

5. The heating power can be adjusted arbitrarily;

6. There is a stirrer on the electronic heating bath;

7. Stainless steel heater;

8. The voltmeter shows the heating status;

9. The shell is made of cold-rolled steel plate, and the surface is treated with electrostatic spray, which has good rust resistance and is easy to clean;

10. Safety facilities can prevent overheating and low water level;

11. It is very convenient to access the control box;

12. Borosilicate glass test tube with scale.