Home > Products > Overhead Line Reactive Power Compensation > Pole mounted capacitor banks improve power factor and to maintain voltage profile
Pole mounted capacitor banks improve power factor and to maintain voltage profile
- T/T Credit Card
You May Like
-
Pole mounted capacitor banks installed on single pole or double pole
-
11kv 33kv distribution lines pole mounted capacitor bank panel mount
-
Made in China 11000v 300kvar pole mounted capacitor bank complete
-
300 kvar 11 kv pole mounted capacitor bank transmission distribution and substation
-
Pole mounted capacitor bank transformer supply electricity
-
Overhead line 3 poles pole mounted capacitor bank system
Product Description
Pole mounted capacitor banks improve power factor and to maintain voltage profile
Description
ZBTBB power line reactive power automatic compensation device is mainly used in 35kV 10kV (or) 6kV distribution line or industrial and mining enterprises, installed on the overhead line pole, as to improve the power factor, reduce the line loss, save energy, improve the quality of voltage.With fault and voltage loss protection function,can realize comprehensive control of line voltage and reactive power.
Conditions of use
1. Altitude: not higher than 1500m;
2. Wind speed: not more than 35m/s;
3. Earthquake: The earthquake intensity does not exceed 8 degrees;
4. Sunshine: the maximum amplitude is 0.1w/cm3;
5 . Ambient air humidity: upper limit +45℃, lower limit -40℃;
6. Chemical conditions: no harmful gases and vapors, no conductive or explosive dust in the installation site;
7. The installation inclination should not exceed 5 degrees.
Advantages
1.Improve power factor, reduce line loss, save energy, and improve voltage quality.
2.According to actual needs, the parameters are set by the user, the microcomputer judges and analyzes by itself, and realizes the automatic switching of the high-voltage parallel capacitor bank.
3.Equipped with complete protection functions, with busbar short-circuit and quick-break protection, short-time protection of short-circuit between capacitors, short-time protection of capacitor over-current and over-voltage protection, under-voltage protection, phase loss protection and rejection protection, etc.
4.Integrated structure, convenient installation, simple maintenance, complete functions, high quality.
Technical Parameters
Number | Content | Unit | Parameter |
1 | Rated voltage | kV | 10 |
2 | Highest voltage | kV | 12 |
3 | Rated switching capacitor bank current | A | 50 |
4 | Rated switching capacitor bank capacity | kVar | 600 |
5 | Rated closing short-circuit current (peak value) | kA | 5 |
6 | Rated stable current (peak value) | kA | 5 |
7 | Rated 4S thermal stability current | kA | 2 |
8 | Power frequency withstand voltage (1min) | kV | 42 (dry) 32 (wet) |
Related products
Contact Us
- Strong Power Electric Co.,Ltd.
Product Categories
New Products
-
Pole mounted capacitor bank with mounting structures external expulsion fuses and automatic switches
-
Pole mounted capacitor bank with switch for systems voltage of 11/22 kv
-
Distribution and transmission systems install shunt capacitors banks at the load
-
High voltage line reactive power compensation device capacitor banks
-
Capacitor banks lightning rods switches control and protection system
-
Capacitor banks distribution feeders or substations compensates reactive power and provides voltage support
-
Pole mount shunt capacitor bank distribution feeder system lower system losses
-
Distribution control system pole-mount capacitor bank for overhead system applications
-
High voltage capacitors banks for overhead distribution systems
-
400kvar 11kv 50 hz pole mounted hv distribution capacitor bank with switches
-
Installing capacitor banks over feeders close to inductive loads compensating reactive energy
-
Medium and high voltage capacitor banks compensate reactive energy improves power grid system performance
-
2.4kv to 38kv galvanized steel or aluminum rack overhead pole line shunt capacitor bank
-
Load center or poles or substations distribution capacitors banks provide voltage stability
-
Pole mounted shunt capacitors banks improved voltage profile reduced line/ feeder losses
-
Pole mounted shunt capacitors provide reactive power and reduced kva demand
-
Pole-mounted harmonic filter bank from professional manufacturer
-
Fixed units or switched units pole-mounted capacitor banks to meet the varying load conditions
-
IP65 protection lv electrical distribution feeder pillars ensure power distribution requirements met
-
JP low voltage electrical integrated distribution board power feeder pillar panel
-
JP cabinet IP56 IP44 waterproof electric distribution cabinet outdoor integrated distribution box
-
Power grid integrated distribution cabinet overload over voltage over frequency leakage protection
-
Outdoor comprehensive distribution box outlet protection and reactive power compensation
-
Electricity transmission project jp electrical power distribution cabinet transformer distribution box
Popular Searches
- switchgear
- distribution board
- Zinc Oxide Varistor
- Lightning Rod
- spd
- surge protector
- surge arrester
- surge suppressor
- power surge
- lightning arrester
- zinc oxide lightning arresters
- Lightning Arrester Rod
- Lightning Rod Tower
- Polymer Surge Arrester
- electrical switchgear
- zinc oxide varistors
- power distribution unit
- pdu
- Power Supply Device
- distribution cabinet
- Metal Oxide Varistor
- cabinet pdu
- rack pdu
- power distribution cabinet
- Power Resistor
- High Voltage Resistor
- switchboard
- hv switchgear
- gas insulated switchgear
- ring main unit
Recommended Products
- Polyester Enclosure Fiberglass box IP65 waterproof GRP Cabinet distribution box
- AC LV Withdrawable Switchgear
- SF6 Fully Insulated Ring Main Unit
- Combined Busbar Hydraulic Turret-Type 3 in 1 Processing Machine with CE certified (EU standards) & ISO 9001
- Double Ended CNC Busbar Trunking Bending Machine
- Automatic Servo Turret CNC Three-table Busbar Processing Machine
- Open-Type Manual Control Hydraulic Turret-Type 3 in 1 Busbar Processing Machine-Heavy-Duty
- Open-Type Hydraulic Turret-Type 3 in 1 CNC busbar processing machine/303A,303B,303/503C,303/503D
- CNC Double Table 3 in 1 Turret-Type Busbar Processing Machine close type ISO 9001 BT-C303C/BT-C503C/BT-C803C
- Manual Control Hydraulic Turret-Type 3 in 1 Busbar processing Machine-Closed Type BT-M303C/BT-M503C
- Wholesales NSPV MLJ-01 connector Solar PV Panel Mini Junction Box
- 17.5 KV Full-enclosed Outdoor Epoxy Resin Casting and Double Pole Insulated Voltage Transformer
Find Similar Products By Category
- Electrical & Electronics > Power Supply & Distribution > Power Distribution Cabinet & Box
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.

- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile