manufacturer supply xlpe Insulated copper cable N2XY 5X25MM2

0.6/1KV xlpe Insulated copper cable is with following features:

xlpe Insulated copper cable can be installed in duct, tray or direct burial. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected by eciencies in the installation.

1. The products are mainly complying with iec 60502 standard, also can be produced according to OEM requirements and other standards, such as bs standard, din standard, ASTM standard, etc.

Voltage grade is up to 35kv, cross-section area can be up to 400 sqmm (copper or aluminiun conductor). Conductor long-time operating temperature is 90 degrees. In short circuit, conductor highest temperature should be not more than 250 degrees.

3. Laying conditions: For lyaing under ground with large different altitude, be able to bear external machanical force and moderate pulling force 

 0.6/1KV xlpe Insulated copper cable  with follow size and data

MOQ, Capacity& Payment method

For electric wire, aerial cable and power cable, the Minimum Order Quantity is 1000 meters each type. The capacity is 20 kilometers per day.

 
For electric conductor(AAC,ACSR,AAAC,AASC) for transmission line, the Minimum Order Quantity is 1 ton each type. The capacity is 50 tons per day.

Our payment term is 30% deposit in advance, 70% rest against copy of B/L; or 100% irrevocable L/C at sigh

Packing Pictures: