0-10V and 4-20mA control 100% proportional flow control 2 port 35mm motorised valve

0-10V and 4-20mA control 100% proportional flow control 2 port 35mm motorised valve

 Description

Equal percentage flow characteristic guarantees the valve performances of stability. Control ball valves are widely used in HVAC system, heating system, water treatment equipment, and water running control in industrial automation, such as: AHU, flesh air-handling unit, differential pressure control unit and heat exchanger for flow regulation and on/off control.

Adjustable flow ratio, high reliability, high life, the use of graphite reinforced PTFE valve seals, valve stem seals double EPDM. Built-one assignment butterfly, afraid of reverse pressure. Equal percentage flow characteristic. High Off strength 1.4MPa. Rated working pressure PN40. Maximum working pressure 0.35Mpa. With manual actuator shorted button. -5 To 121 ° C operating temperature. Suitable for central air-conditioning, heating system, hot and cold water, steam humidification.

 Application

HVAC system

Heating system

Water treatment system

 Industrial equipments

Operational mode

 The actuator is controlled by a modulating on/off , proportional control system and move the ball of the valve, to the opening position dictated by the control signal.

Technical data
Medium: cold/hot water, with 50% glycol, 100 kPa saturated steam  
Temperature of medium: 2°C...90°C

 Rated pressure: PN40                             

 Pipe connector: internal thread                              

 Ambient temp. range: −5…+60°C;0…90%RH    Size: 1/2’’ -2’’

 Valve type: 2-way and 3-way                    

 Flow characteristic: equal percentage, on/off

 Material

 Valve body: forged brass, Hpb59-1              

Seal: ball: EPDM+PTFE

Ball:  brass                               

stem: EPDM      

Valve connector: PC                                      

Valve Spindle: aluminum alloy

Actuator:

 24VAC/DC±15%, proportional (0-10VDC, 0-10VDC/4-20Ma)

Output torque: 3 type, 4N.m, 6N.m and 10N.m      Angle of rotation: 90°

Manual handle   Automatic overload protection system

Manual selection of ball rotation direction: C.W. /C.C.W, factory setting is C.W.

Protect rank: IP54        Operation time: 62S

Wiring Connection:

Image