Nm360 Nm400 Hot Rolled Steel Plates Nm400 Wear Resistant Steel Sheet Price per Ton

FOB Price

Negotiable / Ton

1 Ton(Min. Order)

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Description

nm360 nm400 hot rolled steel plates nm400 wear resistant steel sheet price per ton

Introduction of Hot rolled steel plates NM400:
Hot rolled steel plates NM400 is a kind of Chinese wear/abrasion resistant steel plate, which is well received in middle east and Africa.

Hot rolled steel plates NM400 was hot rolled and then the plates were heat-treated by direct quenching and tempering and reheat quenching and tempering techniques, respectively. The impact test was carried out with an instrumented impact tester. The outstanding performance characteristics of Hot rolled steel plates NM400 come from a combination of hardness, strength and toughness. As a result, Hot rolled steel plates NM400 can stand up to sliding, impact and squeezing wear.

Hot rolled steel plates NM400 is 3 times to 5 times more than common low-alloy steel plates which can significantly improve surface hardness, usually achieved 360 ~ 450HB.

Hot rolled steel plates NM400 chemical composition:

Grade	C	Si	Mn	P	S	Cr	Ni	Mo	Ti	B	Als
NM400	≤0.30	≤0.70	≤1.60	≤0.025	≤0.010	≤1.00	≤0.70	≤0.50	≤0.050	0.0005-0.006	≥0.010

Hot rolled steel plates NM400 mechanical properties:

Grade	Thickness	Tensile Strength	Elongation	Impact energy	HBW
Grade	mm	Rm/MPa	%	J/-20℃	HBW
NM400	≤80	≥1200	≥10	≥24	370-430

Hot rolled steel plates NM400 application:
Hot rolled steel plates NM400 is widely used in engineering machinery, mining machinery, coal mining machinery, environmental protection machinery, metallurgical machinery and other products. For example: excavator, loader, bulldozer bucket board, blade plate, side blade plate, blade, lining plate and blade of the crusher, etc.

Contact: sales6@bebonchina.com