IEC60529 IP Code Probe Kits

IEC60529 IP Code Probe Kits /12 Months Warranty Pack with Tool Box

1. Introduction:

IP code probe kits are to verify the degrees of protection specified in IEC60529,  includes test probe A and test probe 1 for IP1X testin,g test probe B and test probe 2 for IP2X testing, test probe C for IP3X testing and test probe D for IP4X testing. 

2. Specification

Test Probe A for IP1X Testing: Φ50 sphere with handle

1). Introduction:

Test probe A ( Φ50 sphere with handle) is designed according to IEC61032 fig.1, and meet the requirements of IEC60529 regarding IP1X testing and IEC60065. This probe is intended to verify the protection of persons against access to hazardous parts

Test probe A with 50N force is means for the protection of person’s back of hand from hazard parts.

2). Specification

Test Probe B for IP2X testing: jointed test finger

1). Introduction:

Test probe B ( jointed test finger) is design according to IEC61032 figure 2, meet the requirements of UL507, UL1278 figure 8 and EN60529 figure 2.

Test probe B with 10N force is for IP2X testing, it means for the protection of person’s finger from hazard parts.

2). Specification

Test probe C for IP3X testing: Φ2.5 rod-length 100

1). Introduction:

Test probe C (test rod) Designed according to IEC61032 figure 3, meet the requirements of IEC60529-IP3, IEC60065,IEC60598 and etc.

Test probe C is for IP3X testing, it means for the protection against solid foreign objects of Φ2.5mm and greater

Test probe C with 3N force is for IP3X testing, it means for the protection of person’s tool from hazard parts.

2). Specification

Test Probe D for IP4X testing: Φ1.0 wire-length 100

1). Introduction:

Test probe D (Test wire) Designed according to IEC61032 figure 4, meet the requirements of IEC60529-IP3,IEC60065,IEC60598 and etc.

Test probe D is for IP4X testing, it means for the protection against solid foreign objects of Φ1.0mm and greater.

Test probe D with 1N force is for IP4X testing, it means for the protection of person’s wire from hazard parts.

2). Specification

Test Probe 1: 500g steel sphere

1). Introduction:

Test probe 1 (500g test sphere) is designed according to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05.

Test probe 1 is for IP1X testing, it means for the protection against solid foreign objects of Φ50mm or greater.

2). Specification:

Diameter of sphere: 50mm+0.05

Weight of the sphere:500g

Material: steel

Test probe 2: 15g steel sphere

1). Introduction:

Test probe 2 (15g test sphere) Designed according to IEC61032 figure 6, meet the requirement of IEC60529-IP2. The diameter of sphere is 12.5+0.2.

Test probe 2 is for IP2X testing, it means for the protection against solid foreign objects of Φ12.5mm or greater.

2). Specification:

diameter of the sphere: 12.5mm (50.8mm, 63.5mm, 38.1mm choosable)

weight of the sphere: 15g

Material: steel sphere

Handle for optional