- Pego Group HK Company Limited
-
China
- Main products: Lab equipment, emc tester, environment test chamber, spring hammer, go no go gauge, iec test probe, glow wire test etc.
Home > Products > New product > IEC60335-1 Stability Tester Inclined Plane Device
IEC60335-1 Stability Tester Inclined Plane Device
- 1000 Piece / Pieces per Month
- T/T L/C D/P D/A
- 7 days
You May Like
Product Description
IEC60335-1 Electrical Stability Tester/Inclined Plane Device
Description:
This device is designed and manufactured in accordance with the IEC60335-1 clause 20.1. The Stability Tester is to determine the stability of electric appliances which are used on a table or on the floor. The device consists of a surface and an angle adjusting device, with angles 0~15° adjustable.
The appliance is placed in any normal position of use on a plane inclined at an angle of 10° to the horizontal, the supply cord resting on the inclined plane in the most unfavourable position. However, if part of an appliance comes into contact with the horizontal supporting surface when the appliance is tilted through an angle of 10°, the appliance is placed on a horizontal support and tilted in the most unfavourable direction through an angle of 10°.
Specifications:
Surface: WD-3: 1000mm, WD-2: 800mm, WD-1: 600mm
Angle Range: WD-3: 0-30° , WD-2: 0-30°, WD-1: 0-45°
Rotat Way: Hand-actuated/dynamoelectric
Contact Us
- Pego Group HK Company Limited
- Contact nameMs Alice Peng Chat Now
- Phone86-0795-3560528
- AddressNo.233, Yangshan Road, Yuanzhou Disctrict, Yichun, Jiangxi, 336000, China
Product Categories
| Electric Safety Test | EMI & EMC System | Environment Test Equipment | Gauges |
| IEC/UL Test Probe | Impact Testing Machine | LED Equipment | New product |
New Products
-
IEC61032 Figure 13 Small Test Finger Probe 19 with 5.6mm diameter
-
500V Insulation Resistance Tester
-
PG-1S CCD Spectroradiometer and Integrating Sphere Test System
-
ESD-2000Q ESD Gun Electrostatic Discharge Simulator
-
LSG-6K10 IEC61000-4-5 Lightning Surge Generator
-
IEC61032 Rigid Finger Probe
-
IEC61032 Test Probe 41
-
British BS1363-2 Plug & Socket Gauge
-
UL498 American Plug and Socket Gauge
-
AS/NZS3112 Australia Plug and Socket Gauges
-
Portable LED Colorimeter with 10cm Integrating Sphere for CCT and CRI Test
-
LED Multiplex Temperature Logging Meter
-
IEC60061-3 E27/E14/E26/B22/E39/ E40 Gauge Go Not Go for Lamp Cap and Lamp Holder
-
G13 Lamp Cap Gauge in accordance with IEC60061-3 standard 7006-44-4 and 7006-45-4
-
GU10 Go No Go Gauge 7006-121-1
-
IEC60529 IPX3 and IPX4 Oscillating Tube Waterproof Testing Machine
-
IEC60529 IPX5/6 Rain Test Equipment with 6.3mm and 12.5mm Jet Nozzle
-
IPX1/2 Drip Box Waterproof Testing Machine
-
Continuous Immersion Tank IPX8 Waterproof Testing Machine
-
IEC60529 Stainless Steel IPX7 Tank Rain Testing Machine
-
G13 Go and Not Go Gauge 7006-44-4
-
G13 Go Gauge for Bi-pin Cap on finished lamps 7006-45-4
-
G5 Go Gauge for Bi-pin Cap on finished lamps 7006-46A-3
-
G5 Go and Not Go Gauge for Unmounted Bi-pin Cap 7006-46-3
Popular Searches
- digital tester
- Resistance Tester
- electrical instrument
- test instrument
- lab equipment
- analysis instrument
- laboratory instrument
- Asphalt Mixture Mixer
- launch x431 master
- x431
- Gloss Meter
- Resistance Meter
- digital instrument
- dc load bank
- testing equipment
- testing machine
- battery load bank
- Circuit Tester
- Impact Tester
- lab instrument
- weather station
- gps receiver
- laboratory instruments
- test equipment
- laboratory equipment
- electronic timer
- electronic meter
- electronic instrument
- Electricity Meter
- data collector
Recommended Products
- WTB-CUP series computerized cupping testing machine
- GRP Gre Pipe Cyclic Hydraulic Test Systems
- GRP Pipe Ring Stiffness Testing Machines
- Glass Reinforced Polyester Split Disc Testing Machine
- GRP Pipe Gre Pipe Hdb Pdb Long-Terms Testing System
- continuous pellet compression testing static pellet compression test dynamic pellet compression test
- pellet fracture load testing pellet load vs deformation curve bulk density and strength test for pellets
- high-accuracy pellet compression machine supplier pellet crushing strength measurement pellet breaking force test
- pellet strength testing equipment price quote customized pellet compression testing solutions export pellet testing machines worldwide
- lab pellet strength testing machine for sale how to test pellet compressive strength pellet compression tester for laboratory
- standardized pellet mechanical strength test pellet compression tester supplier and manufacturer
- EN ISO 4700 iron ore pellet strength test ASTM pellet crush strength testing machine ISO standard pellet compression tester
Find Similar Products By Category
- Instruments & Meters > Test Instrument > Test Machine
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Ms Alice Peng
Welcome to my shop, I'm glad to serve you. Please feel free to send me any questions you may have.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile