SV-5QC French movement exhaust analyzer

Introduction:

SV-5QC car exhaust analyzer, France Capelec imported the movement, the principle of non-divisional infrared absorption method, by microcomputer analysis, can be directly measured vehicle exhaust emissions of HC, CO and CO2 concentration; the use of electrochemical principles The concentration of NO and O2 in the exhaust gas is measured and the excess air factor λ can be calculated from the measured concentrations of CO, CO2, HC and O2.

SV-5QC-type vehicle exhaust analyzer (new) the introduction of foreign advanced technology, assembled by a complete set of French Capelec imported movement with accurate measurement, easy operation, high durability, fast detection speed, the new upgraded SV- 5QC, with large LCD screen display, more convenient readings and operations.

Features:

1.in line with national standards GB / T18285-2005.

2.the use of imported France Capelec imported movement, the principle of irrespective of light absorption by infrared spectroscopy to measure the exhaust emissions of automotive HC, CO, CO2, electrochemical measurements of O2, NO concentration.

3.with idle speed, dual idle speed test function, you can match the oil temperature and speed measurement function.

nfigure 7-inch high-brightness LCD display, multi-language operation menu.

5.automatic calculation, shows the value of excess air coefficient λ.

6.equipped with RS-232C digital serial communication interface, easy networking.

7.with more than 500 groups of data storage, access functions.

nfigurable printer, printing can enter, output license plate number.

9.can be for natural gas, liquefied petroleum gas and gasoline three kinds of vehicles for exhaust testing.

10.Configurable automotive power inverter, convenient vehicle exhaust inspection.

Technical Parameters:

1.the use of environmental conditions:

Temperature: 0 ~ 40 ℃

Humidity: not more than 95%

Atmospheric pressure: 70.0 ~ 106kPa

Power: AC220V ± 10%; 50Hz ± 1Hz

asuring range:

HC: 0 to 20000 (ppm) vol

CO: 0 to 15.0 (%) vol

CO2: 0 ~ 20.0 (%) vol

O2: 0 to 25.0 (%) vol

NO: 0-5000 (ppm) vol

λ: 0-9.9999

Engine speed (rpm): 300 ~ 9999rpm (optional)

Oil temperature: 0 ~ 120 ℃ (optional)

asurement accuracy:

HC: 1 ppm

CO: 0.001%

CO2: 0.01%

O2: 0.1%

NO: 1ppm

asurement error:

Response time: not more than 10s, O2; NO not more than 15s

Preheat time: 10 minutes (can be preheat 3 minutes emergency detection)

Size: 339 * 260 * 158mm (L * W * H)