HK-7100A/7101 combustible gas detector

Introduction:

HK-7100A/HK-7101 combustible gas detector is a kind of instrument independently researched and developed by our company to monitor the concentration of combustible gas in the field environment in the control room. It can be widely used in petrochemical, oil and gas storage and transportation, chemical industry, oil depot , Liquefied gas stations, gas-fired boiler rooms and other areas where flammable and explosive hazardous gases exist.

Features:

1. Five detection principles cover almost all flammable and toxic gases;

2. Five kinds of detection principle detector host universal, hundreds of gas and range of smart sensors are fully compatible, fully interchangeable;

3. It is very convenient to replace the pluggable smart sensor, the host automatically recognizes the measuring principle of the sensor, the type of gas measured, the range, etc.;

4. The sensor supports hot-plugging, plug and play, sensor failure self-diagnosis;

5. Advanced 32-bit embedded microcontroller technology, data processing and rapid;

6. Can use centralized bus power supply, can also use independent area power supply, the choice is more convenient;

7. Wide temperature, high brightness OLED display, easy reading in direct sunlight and dark environment, adapt to harsh temperature and lighting environment;

8. Chinese and English bilingual menu, friendly user interface;

9. Unique magnetic pen and infrared remote control operating mode (infrared remote control is optional), user-friendly operation;

10. The advanced SMT patch process reduces the volume of the product and improves the reliability of the product.

Technical Parameters:

1. Infrared measuring principle

Display: OLED display in English and Chinese, and one, two, fault alarm indicator

Detection gas: flammable/toxic gas such as HC, CO2

Sampling method: natural diffusion

Resolution: 1%FS

Response time (T90): ≤15s

Ambient temperature: (-40-60)°C

Signal transmission: (4-20) mA, (4-20) mA+RS485 bus optional

Operating voltage: DC (18-30)V (controller bus power or independent area power supply)

Connection method: three-wire or four-wire

Power: ≤5 W

Protection class: IP66

Operation method: magnetic pen, infrared remote control

Measuring principle: infrared

Measurement range: HC:(0-100)%LEL

CO2:(0-5000)×10-6,(0-2)%,(0-5)%,(0-100)% optional

Measurement error: ±3%FS

Alarm concentration: Two-level alarm and fault relay, one and two alarm concentrations can be set

Atmospheric pressure: (86-106)kPa

Transmission distance: (4-20)mA: ≤1000m (2.5mm2)

RS485 bus: ≤1200m (2.5mm2)

Explosion-proof mark: Exd II CT6Gb

Implementation of the standard: GB15322.1-2003

2. Catalytic combustion measurement principle

Display: OLED display in English and Chinese, and one, two, fault alarm indicator

Gas Detection: Combustible Gas

Sampling method: natural diffusion

Alarm indication: A primary alarm, secondary alarm, fault alarm indication

Resolution: 1% LEL

Response time (T90): ≤10s

Ambient temperature: (-40-70)°C

Signal transmission: (4-20) mA, (4-20) mA+RS485 bus optional

Operating voltage: DC (18-30)V (controller bus power or independent area power supply)

Connection method: three-wire or four-wire

Power: ≤5 W

Protection class: IP66

Operation method: magnetic pen, infrared remote control

Measuring principle: Catalytic combustion

Measuring range: (0-100)%LEL

Measurement error: ±3%LEL

Alarm concentration: Two-level alarm and fault relay, one and two alarm concentrations can be set

Atmospheric pressure: (86-106)kPa

Transmission distance: (4-20)mA: ≤1000m (2.5mm2)

RS485 bus: ≤1200m (2.5mm2)

Explosion-proof mark: Exd II CT6Gb

Implementation of the standard: GB15322.1-2003

Dear customer,

We ,Xi’an Yima Opto-electrical Technology Com.,Ltd. is an integrated economic entity of R&D,manufacturing and trading with over 20 years of history .

Our business scope covers various fields such as biochemical analysis,environmental protection,industrial testing, bioscience,medical apparatus and instruments,internet technology and some frontier science.

Through a long-time development,we own a national resources system of various professional talents , abundant supply for various components &parts and special materials, full producing &processing equipments , strong Technological standardization and a complete quality assurance system.

If you need OEM or ODM in manufacturing ,scientific research , market development and or you want to build your own brand in your country, it’s our honor to cooperate with you.In this way ,we have developed many products for our customers from the USA, Europe and South Africa and got good feedback on Alibaba

We firmly believe that science and technology is no boundaries

Our mission is to make every effort to contribute to all humanity.