DTS-17 High Resolution Stress Analyzer

Introduction:

The DST-17 X-ray stress analyzer introduced by our company provides the most reliable detection method for materials and their products. The residual stress and texture can be accurately measured on multi-domain material structures and irregular-shaped components. The instrument features high power, high resolution, and accurate measurement results.

Features:

1. High precision diffraction angle measuring device to obtain the most accurate 2θ angle;

2. Realize the residual stress measurement with the same inclination and roll method;

3. Measure the same point X, Y direction of stress measurement automatically converted without the need to operate the sample;

4. The number of sample measurement points can be arbitrarily set in the same plane, and the residual stress measurement can be performed automatically and sequentially;

5. High-resolution SDD detector, when the target is fixed, it can realize the measurement of residual stress of various materials;

6. Simultaneously configure the Si drift linear array detector to quickly complete the residual stress measurement;

7.α rotation range is large, to achieve the lateral stress measurement, pole figure measurement;

8. Built-in laser ranging locator, to achieve automatic sample positioning, repeatability is less than 3μm;

9.CCD camera and laser-assisted positioning system make sample positioning easier;

10. Instrument to achieve intelligent control, quick completion of residual stress measurement, easy to operate;

11. Complete data processing software, which can edit Miller index, Young's modulus Poisson's ratio calculation parameters, to achieve accurate calculation of residual stress, 12.Half-peak width, austenite content. Professional software completes texture calculations and draws polar plots.

Technical Parameters:

2θ angle range: 110°-170°, horn angle range: 0-60°, horn angle range: 0-360°, α angle range: 0-70°. 2θ angular resolution to a minimum of 0.01°, repeatability of 0.0001°;

X-ray emitter tube voltage: 10-60kV, tube current: 5-50mA; stability: less than 0.005%.

Metal-ceramic X-ray tubes: Cu, Cr, Fe, Ti, V, Co, Mn, and other targets, in-ray circular spots: 0.2, 0.5, 1, 2 mm; rectangular spots: 0.5 x 3, 0.5 x 5, 1 × 3, 1 × 5, 2 × 3, 2 × 5mm and so on.

The product meets the ASTM E915-2010, and EN 15305-2008 and GB7704-2008 residual stress analysis and testing standards, and the production process meets the requirements of the ISO 9001 quality management system.

Dear customer,

  We ,Xi’an Yima Opto-electrical Technology Com.,Ltd. is an integrated economic entity of R&D,manufacturing and trading with over 20 years of history .

  Our business scope covers various fields such as biochemical analysis,environmental protection,industrial testing, bioscience,medical apparatus and instruments,internet technology and some frontier science.

  Through a long-time development,we own a national resources system of various professional talents , abundant supply for various components &parts and special materials, full producing &processing equipments , strong Technological standardization and a complete quality assurance system.

  If you need OEM or ODM in manufacturing ,scientific research , market development and or you want to build your own brand in your country, it’s our honor to cooperate with you.In this way ,we have developed many products for our customers from the USA, Europe and South Africa and got good feedback on Alibaba

  We firmly believe that science and technology is no boundaries

  Our mission is to make every effort to contribute to all humanity.