CS150 single channel Potentiostat for corrosion test Potentiostat / Galvanostat

 CS150 single channel Potentiostat for corrosion test Potentiostat / Galvanostat

Introduction: 

CS electrochemical workstation is a comprehensive research platform for corrosion, batteries, electrochemical analysis, electrochemical sensor, life science and environmental chemistry.

Features:

Corrosion mechanism of metals in water, concrete and soil, etc.

Batteries (Li-ion battery, solar battery, fuel cell, super capacitors), new materials, optoelectronic materials;

Electrochemical analysis and sensor; 

Reaction mechanism of electro-synthesis, electro-deposition (electroplating), anodic oxidation, etc.

Fast evaluation of corrosion inhibitor, water stabilizer, coating and cathodic protection.

Technical parameters :

1. Specifications (Hardware)

2- or 3- or 4-electrode configuration

Floating (isolated from earth) or earth ground

Potential control range: ±10V

Current control range: ±2.0A

Potential control accuracy: 0.1%×full range±1mV

Current control accuracy: 0.1%×full range

Potential resolution: 10μV (>100Hz), 3μV (<10Hz)

Current sensitivity: 10pA

Rise time: <1μs (<10mA), <10μs (<2A)

Reference electrode input impedance: 1012Ω||20pF

Current range: 2A~200nA, 8 ranges

Compliance voltage: ±21V

Maximum current output: 2.0A

CV and LSV scan rate: 0.001mV~10,000V/s

CA and CC pulse width: 0.0001~65,000s

Current increment during scan: 1mA@1A/ms

Potential increment during scan: 0.076mV@1V/ms

SWV frequency: 0.001~100 kHz

DPV and NPV pulse width: 0.0001~1000s

AD data acquisition: 16bit@1 MHz,20bit@1 kHz

DA Resolution: 16bit, setup time: 1μs

Minimum potential increment in CV: 0.075mV

IMP frequency: 10μHz~1MHz

Low-pass filters: covering 8-decade

Potential and current range: automatic

2. Electrochemical impedance

   Signal generator:

Frequency range: 10μHz~1MHz

Frequency accuracy: 0.005%

AC signal amplitude: 1mV~2500mV

Signal resolution: 0.1 mV RMS

DC Bias: -10~+10V

Output impedance: 50Ω

Waveform: Sine wave, triangular wave and square wave

Wave distortion: <1%

Scanning mode: Logarithmic/linear, increase/decrease

Signal analyzer:

Integral time: minimum: 10ms or the longest time of a cycle

Maximum: 106 cycles or 105s

Measurement delay: 0~105s

DC offset compensation:

Potential automatic compensation range: -10V~+10V

Current compensation range: -1A~+1A

Bandwidth: 8-decade frequency range, automatic and manual setting

3. PC and O/S requirement

Communications Interface: isolated Universal Serial Bus (USB 2.0)

Operating System: Windows 2000/XP/ Win7/Win8

4. Weight / Measurements

Net weight: 6.5kg

Gross weight: 10kg

Instrument size: 365 x 305 x160mm

Package measurements: 525 x 375x 225mm

5. Software/Model 

Dear customer,

We ,Xi’an Yima Opto-electrical Technology Com.,Ltd. is an integrated economic entity of R&D,manufacturing and trading with over 20 years of history .

Our business scope covers various fields such as biochemical analysis,environmental protection,industrial testing, bioscience,medical apparatus and instruments,internet technology and some frontier science.

Through a long-time development,we own a national resources system of various professional talents , abundant supply for various components &parts and special materials, full producing &processing equipments , strong Technological standardization and a complete quality assurance system.

If you need OEM or ODM in manufacturing ,scientific research , market development and or you want to build your own brand in your country, it’s our honor to cooperate with you.In this way ,we have developed many products for our customers from the USA, Europe and South Africa and got good feedback on Alibaba

We firmly believe that science and technology is no boundaries

Our mission is to make every effort to contribute to all humanity.