Temperature Test Benchtop for Photocatalytic film

Temperature Test Benchtop for Photocatalytic film

Heated And Humified Chambers/Usage

This series of products for aerospace products, information, electronic instrumentation, materials, electrical and electronic products, a variety of electronic vitality in hot and humid environments, testing its performance.

Programmable Humidity Chamber/Device structure

(1)chamber box for the overall form of the structure , the cooling system is located in the lower part of the cabinet , the control system is located in the upper part of the chamber.

(2)the end of the duct mezzanine studio , distribution heaters , refrigeration evaporator, fan and other devices ; left side of the chamber has Ф50 cable hole , single- chamber door ( stainless steel door handle embedded ).

(3)the use of double high-temperature aging silicone rubber seal , which can effectively guarantee the drain chamber temperature.

Climate Benchtop/Models and parameters

Type the box size W * D * H (cm)

TH-80   40*50*40

TH-150  50*60*50

TH-225  60*75*50

TH-408  60*85*80

TH-800  100*100*80

TH-1000 100*100*100

"TH" on behalf of temperature and humidity chamber;

Touch screen controller Programmable Instrumentation

Test Benchtop/Technical parameters:

Temperature Range A: 0 ~ 150 celsius degree B: -20 ~ 150 celsius degree C: -40 ~ 150 celsius degree D: -60 ~ 150 celsius degree E: -70 ~ 150 celsius degree.

Humidity range 30% ~ 98% RH

Temperature display accuracy of 0.1celsius degree

Accuracy of 0.1% RH humidity display

Humidity uniformity +2 percent , -3 percent R · H

Temperature degrees about 2percent celsius degree

Heating and cooling rate of 0.7 celsius degree ~ 1.5 celsius degree (non-linear load average) per minute

Control: Balance thermostat humidity control system (BTHC), with PID control SSR, the heated humidification system is equal to the amount of heat and moisture loss, it can use long-term stability.

Mechanical sheet metal structure

1.Box using CNC machining , elegant design , innovative and no reaction handle , easy to operate .

2.Imports of high grade stainless steel inner tank (SUS304) mirror panels or 304B welding is made box outside the gall A3 steel spray .

3.Microcomputer temperature and humidity control, accurate and reliable temperature and humidity control .

4.Large observation window with bright lights to keep the box , and the use of multi-layered glass , ready to clear observation box condition .

5.With a separate limit temperature alarm system , automatic temperature exceeds the limit interruption ensures experiments run safely without accidents.

6.Optional recorder, a printer can print and scan the record set parameters of temperature and humidity curve , 4 ~ 20mA standard signal .

7.The left side of the box with a test hole with a diameter of 50mm .