B1/2BX-316SS25,25 nozzle,BX full cone spray nozzle

B1/2BX-316SS25,25 nozzle,BX full cone spray nozzle

【YBS Nozzle】offer 1/2BX-316SS25,25 nozzle,BX full cone spray nozzle and other products.Tel:86-0769-81609791

YBS facus on spraying and purification products.Our products are used in more than 300 industries and in cleaning, cooling, 

dispensing,marking and dozens of other operations.

Applications:

Widely used in gas cooling , washing gas, dust control , desulfurization, packed tower spray, washing and bleaching cream , 

asphalt molding spray cooling tower , cooling tower , spray fractionator

Hollow cone nozzles produce a hollow cone and full cone spray pattern , the jet angle 60 ° -170 °. This compact device can 

spray the liquid reaches the maximum flow rate in the pipe of a given size at a pressure of 3 bar , the flow rate from 5.5 to 4140 

l / min. Smooth channel design minimizes energy blocking phenomenon ( so called super- jet is not blocked ) . This jet can be 

installed or replaced on most piping systems , providing NPT or BSPT external thread and the thread interface. 2 inches , 3 

inches and 4 inches of the jet stream has flanges and threaded interfaces. Interface size is 1/ 4 inches to 2 inches respectively 

jets or 316 stainless steel casting brass ; but 1/4 inch and 1 inch jet also has TEFLON polytetrafluoroethylene or polyvinylidene 

fluoride manufactured ; the jet stream is also used in various other materials .

Hollow cone nozzles are many kinds of the most characteristic of a nozzle , the liquid through the continuous spiral smaller 

body and collision tangent into small liquid ejected out of the nozzle chamber , from import to export the "smooth channel 

"design, without any hindrance blades and guide vanes , and in the case of the same flow , the maximum flow hollow cone 

nozzle diameter is more than 2 times that of conventional nozzles , thereby reducing the occurrence of obstruction maximum 

extent , hollow cone in operation the nozzle of the liquid injected into the spiral coil to a metal protrusion in the outer orifice. 

This breaks the traditional fluid into relatively fine many concentric rings will form a complete cone spray pattern of the spray 

pattern . The resulting spray pattern is unevenly distributed , rather than full cone spray pattern . Hollow cone nozzle suitable 

for use with the injection fluid is injected into the gas stream , rather than injected into the liquid stream. Flow hollow cone 

nozzles may be up to 0.534 liters / min.

Hollow cone nozzle design is very natural , with anti- jam features , but in practice , pay attention to the selection of the length 

of the nozzle , hollow cone nozzle is a very special nozzle , if precision is not enough, or die without calculated out of the 

nozzle can do the equivalent of a water distribution , but if you go through a very non- design and processing , the hollow cone 

nozzle spray nozzle is a very good number of advantages and performance to be fully tapped , which hollow cone nozzle is 

why big price difference of the reason , because it is a very high quality hollow cone nozzles need very sophisticated needs to 

see its shadow, in fact, is a hollow cone nozzle can be very good atomization nozzle , is an industrial fire a nozzle is very 

important .

Ordering information of  B1/2BX full cone spray nozzle (YBS brand)

Thread: B=BSPT

Materials：None=brass 

                  I=mild steel

 SS=303 stainless steel

 316SS=316 stainless steel

 1/2 B1/2BX-25 B1/2BX-I25 B1/2BX-SS25 B1/2BX-316SS25

B1/2BX-30 B1/2BX-I30 B1/2BX-SS30 B1/2BX-316SS30

B1/2BX-40 B1/2BX-I40 B1/2BX-SS40 B1/2BX-316SS40

B1/2BX-50 B1/2BX-I50 B1/2BX-SS50 B1/2BX-316SS50

B1/2BX-60 B1/2BX-I60 B1/2BX-SS60 B1/2BX-316SS60