B1/2C-SS3,3 Nozzle,C Hollow Cone Nozzle

B1/2C-SS3,3 nozzle,C hollow cone  nozzle

【YBS Nozzle】offer B1/2C-SS3,3 nozzle,C hollow cone  nozzle and other products.Tel:86-0769-81609791

Generally speaking, unwanted solid particles can block the inside of the orifice.Flow is restricted and spray pattern uniformity distributed.

Superfine hollow cone nozzle design ideas and experiment

Both the companies or foreign companies , in ultrafine air hollow cone nozzle design , or to experience, test -based. In theory , the use of supersonic gas atomization is the ideal way to achieve ultra-fine hollow cone nozzle , but so far , no such nozzle of a scientific theory calculations. Then written before the experiment in the combustion nozzle engineering , chemical industry and the aerospace industry are a lot of use , and applications in the chemical industry the need for a nozzle

Frequent . For example, commonly used in the application of the spray dryer air hollow cone nozzle , and a direct-injection nozzle centrifugal mechanical hollow cone nozzle , with air atomizing most widely used. All along, whether it is burning or chemical engineering for industrial applications with a large majority of the hollow cone nozzle flow nozzle mainly working in the thick of atomization conditions . For the most recent being developed novel surface modification machinery and equipment, it takes less than 10 microns sacrifice atomization and spray superfine state .

????Both the companies or foreign companies , in ultrafine air hollow cone nozzle design , or to experience, test -based. In theory , the use of supersonic gas atomization is the ideal way to achieve ultra-fine hollow cone nozzle , but so far , no such nozzle of a scientific theory calculations. Here we use the mixed air flow hollow cone nozzles and three gas- liquid-gas critical path hollow cone nozzle air superfine hollow cone nozzle experiments. Mixed air inside the hollow cone nozzle flow path for the fluid in the road , the road to the outflow sonic nebulizer gas line , three gas-liquid flow path of air hollow cone critical stretch

Middle -shaped nozzle flow path for the fluid path , the path of a subsonic gas flow path , the road to supersonic outflow secondary atomization gas path . Superfine hollow cone nozzle experimental apparatus and experimental ultra-fine hollow cone nozzle principle experiment system is divided into four parts water , gas , experimental gun nozzle , liquid mist test system. 2200 atomized particle size distribution by

Type Malvern laser particle sizer , for the distribution of particle size distribution using the R foot , feet when using a distributed , the computer can be proposed to the original data sets, direct distribution equation given in X and N two parameters. When mixed in the experimental system during air hollow cone nozzle experiment , pneumatic and fluid only away

When the road during the critical three -way air flow hollow cone nozzle experiments , both inside and outside gas line and liquid line while participating in the work . The ultra-fine hollow cone nozzle air mixing experiment hollow cone nozzle real analysis of the available data on the air hollow cone nozzle , the main factors affecting the atomization fineness is airflow velocity . Therefore , the present study mainly from experimental analysis pore diameter , number of holes, the gas-liquid ratio , pressure four aspects . Experimental conditions: nozzle outlet diameter 2.5mm, the nozzle hole diameter was 1.0mm, the gas-liquid discharge amount of 60 degrees angle 30kg / h.

C hollow cone nozzle has the large water passage design which minimize the clogging.

Ordering information of C hollow cone  nozzle(One-piece cast-type) (YBS brand)

Thread: B=BSPT

Materials：None=brass 

                 I=cast iron

SS=316 stainless steel

1/2 B1/2C-3 B1/2CI-3 B1/2C-SS3

B1/2C-4 B1/2CI-4 B1/2C-SS4

B1/2C-5 B1/2CI-5 B1/2C-SS5

B1/2C-7 B1/2CI-7 B1/2C-SS7