Edge / Side / Corner Package Testing Equipment 80KG Load Drop Testing

Edge / Side / Corner Package Testing Equipment 80KG Load ?Drop Testing?

Brief Introduction?

This?drop?tester?is?used?to?simulate?droping?and?impacting?when?package?in?transportation,assembling?or?un-assembling, check?the?package?impacting?resistance?or?the ?rationality?of?the?package ?design. You can?do?the?edge,side,corner?test,testing?height?can?be?adjusted,releasing?device?is?flexible?and?reliable, make?sure?the?test?specimen?will?not?be?affected?by?external?force?when?in?releasing?moment?or?dropping freely.

What is Drop Testing??

Drop testing determines the ability of a package to withstand the rigors of handling by people and machinery in the distribution environment. Numerous studies have shown conclusively that a truly flat drop represents the worst possible input to a packaged product. Therefore, it is crucial that laboratory drop testing be done on a drop test system designed to insure the flattest impacts possible. In addition to accurate flat drop testing, this machine?allows drop testing to be performed on the package\'s edges and corners, for complete performance evaluation. Drop Testers allow you to thoroughly examine the effectiveness of package cushioning and its ability to protect your product, dunnage, closures, and other critical design attributes when exposed to all possible drop test orientations.

Theory

This?machine?simulates?the?freedom?drop?movement?from?different?heights.?

Standard

Design?standards:ISO?2248?JIS?Z0202-87?GB/T4857.5-92

Specifications

Maintain?Procedure?

1. Keep?the?machine?clean.

2.Wipe?the?metal?surface?at?regular?intervals?by?using?boiled?oil,wipe?the?screw?and?gear?with?lubricating?oil?to?maintain?the?machine?and?keep?the?machine?long-life?time.

Attention?Items

1.This?machine?is?suitable?for?3phase,380V?power.

2.Please?don\'t?machine?in?inflammable?environment.

3.Machine?need?to?connect?earth?ground,or?it?will?electric?shock.

4.Use?air?switch?with?earth?leakage?protection.

5.When?machine?in?operation,please?don\'t?machine?other?parts?except?controlling?panels,in?case?of?bruise

6.If?moving?machine,move?it?after?5?minutes?after?cutting?off?machine?power.

Control Panel