Digital Display Plastic Thermal Deformation Vicat Softening Point Tester For Plastic

Digital Display Plastic Thermal Deformation Vicat Softening Point Tester For Plastic

Introduction:

1)?Softening?Point?Testing?Machine?(VST)?is?mainly?used?for?deformation?temperature?and?Vicat?softening?point?test?for?horniness?pipes?and?tubes?materials.?It\'s?suitable?to?measure?the?HDT?and?VICAT?character?of?plastics,?rubber,?nylon,?electrical?insulation?materials?etc.,?widely?used?in?production,?research,?

inspection?department?and?institute?for?educations.?

2) The?tester?is?using?PLC?programmable?controller?for?temperature?control?LCD?display?operation.This?is

the?product?of?simple?operation,?easy?to?use,?stable?performance,?high?precision?products,?and?in?the?

process?of?test?can?be?real?monitoring?test?temperature?and?deformation;?At?the?end?of?the?test?system?

automatically?stop?heating,?the?machine?can?set?the?target?temperature?with?temperature?protection?

function.

3) With?the?sample?holder?lifting?function?so?that?the?sample?holder?can?be?adjusted?to?the?proper?

position?at?the?beginning?and?the?end?of?the?test.?Negative?pressure?induced?air?function?without?oil?

absorption,?not?smoke?in?the?process?of?test,?to?ensure?the?test?environment?is?clean.With?rapid?cooling?

device.

Conform?with?standard?ISO075,?ISO306,?GB/T8802,GB／T1633,GB／T1634?etc..

Characteristic:

1, The tester is floor model, with beautiful appearance and stable performance, high accuracy, easy to use.?
2, Three-way displacement sensor to measure the deformation.?
3, Digital display temperature and displacement.?

Specifications:

1) temperature?control?range:?environment?temperature~300℃

2) Heating?rate:?(120±10)?℃/h?(12±1)?℃/6min

? ? ? ? ? ? ? ? ? ? ? ? (50±5)?℃/h?(5±0.5)?℃/6min

3) Temperature?display?error:?0.1℃

4) Temperature?control?precision:?±0.5℃

5) Maximum?deformation?display?error:?±0.01mm

6) Deformation?measurement?range:?0—1.5mm

7) Sample?holder?number:?3?

8) Heating?medium:?methyl?silicone?oil?or?transformer?oil

9) cooling?mode:?nature?cooling?beyond?150,?water?cooling?or?nature?cooling?below?150

10) Heating?power:?4?kw,?220V?50HZ

11) Instrument?size:?540mm×520mm×970mm

12) Rod?load?and?tray?quality:?68?g