3 circuits(R/G/B) 20meters common anode 18A rgb led light strip remote touched rgb controller

Operating Instructions:

1.Touching ON/OFF button,you can switch on/off the RGB strip.

2.Slide the color button can adjust the same color.

3.Increasing color button can adjust the current color to the most vivid,dicreasing color button is contrary,until pure white.

4.You can adjust the brightness by dimming function,to brighten and dim the light.

5.Gradual change mode:Touch on buttom again under monochrome mode condition,?RGB strip?will be changed?into gradual change mode .Increasing color?button will speed up the color change,decreasing color button will slowdown.

6.Hopping?mode:Under gradual change mode condition,touch on button,the?RGB strip will be changed into hoppingmode.Increasing color button will speed up the hopping,decreasing color button will slowdown.

7.Under Gradual change or hopping mode,touching on switch will change one to the other.Close the RGB strip?and restart it?if you want to enter monochrome mode.?

Instruction

?Thanks?for?using?led?controller?FUT-005N?manufactured?by?Futlight.
One?package?includes:one?controller,one?remote?control(without?battery)
one?core-end?terminal,one?usage?instruction.
Please?contact?your?supplier?if?any?problems?occur?before?you?use.?

Safe?instruction

Please?follow?the?instructions?to?use?safely.

??????????Attention!?Operate?Carefully!?Please?read?the?following?tips?carefully.

1,?Donot?install?the?product?in?areas?with?thundering,strong?magnetic?and?high?pressures.

2,?Make?sure?the?connection?is?right?and?firmed?in?case?of?fire?accident?caused?by?short?circuit.

3,Please?install?the?controller?with?ventilation?to?make?sure?the?temperature?is?appropriate.

4,Please?check?whether?the?input?voltage,power?supply(constant?pressure)
acord?with?the?requirements.?

5,Please?donnot?connect?the?power?before?connection.?

6,Please?contact?the?supplier?when?problems?occur.Don’t?maintain?by?yourself.

7,The?Instruction?is?for?this?Item?Only,no?notification?if?any?amendments.??

Brief?introduction

FUT-005N?is?a?multifunction?Touching?RGB?LED?Controller.?It?adopts?the?most?advanced?PWM?reomte?control?

technology?,can?control all?the?full?color?LED?lighting?with?four?lines?three?circuits(common?anode),with?more?than?640000?combination?

colors?and?15?auto?light?changing?modes.it?widely?applies?

to?RGB?LED?strip?light,LED?Module,etc

Technical?Parameters(remote?control)

1Power?supply:?AAA?battery?*?3pcs

2Cover?Material:ABS

3Fabrication?processing:?multicolour?printing?&?UV?varnish

Technical?Parameters(controller)

1.?Working?voltage:DC12V/24V

2.?Output?control:?3?circuits(R/G/B)

3.?Control?current:6A/circuit

4.?Connecting?mathod:?common?anode

5. Wireless?frequency:433.92MHz

6.?Receiving?range:20meters

Functions?of?Keys

1.?Key?1:?on/off

2.?Key?2:?light?changing?mode(15?modes)

3.?Key?3:color?light/white?light?switching?mode

4.?Key?4:?turn?up(brightness/speed)

5.?Key?5:?turn?down(brightness/speed)

How?to?use

1.?Press?Key?1?to?turn?on/off?in?any?state.

2.?Press?Key?2?to?activate?light?changing?mode,?a?new?mode?each?press,15?modes?in?total.

3.?Press?Key?3?once?to?activate?white?light?mode,?changing?brightness?by?pressing?Key?4/Key?5.?Press?Key?3?

twice

?to?activate?color?light?mode,?changing?brightness?by?pressing?Key?4/Key?5?or?changing?light?color?by?touching?

the?

color?ring.

4.?Resume?fuction.?The?previous?settings?will?be?resumed?while?power?on?again

Matching?code

Press?Key?4?once?within?3?seconds?when?power?on?again,.the?light?will?blink?3?times?if?matching?is?successful.

Clearing?Code?Press?Key?4?five?times?within?3?seconds?when?power?on?again,.the?light?will?blink?6?times?

if?clearing?is?successful.

Caution:

Please?don\'t?touch?or?press?the?color?ring?while?loading?the?battaries?to?ptrotec?the??sensitivenes