1400mm Stainless Steel Temper Rolling Mill Dry Type Siemens High Speed

1400mm Stainless Steel Temper Rolling Mill Dry Type Siemens High Speed

Technical specifications:

1. Main technical parameters

Skin pass is the first working procedure of stainless steel finishing, it’s also the last procedure of cold rolling. It’s not for rolling down the thickness, but for the purpose of improving the mechanical property, to ensure the product shaping processablity, to improve the shape of strip to get straight steel strip, and improve the surface quality of strip.

1. raw material:

Material: Stainless steel 200 300 400 after annealing.
Specification: Thickness H=0.2～1.5×800～1300 mm;
Strip coil ID : φ610
Strip coil OD:: φ2000㎜;
Max. coil weight:W≤25T

2. finished products

Specification: Thickness H=0.2～1.5×800～1300 mm;
Strip coil ID : φ610
Strip coil OD:: φ2000㎜;
Max. coil weight:W≤25T

3. main technical parameters

Extension rate: 0.1～3.0%
Max rolling force: 8000KN
Max tension: 115KN
Max. rolling speed: 240m/min;
Threading speed: 20m/min
rolling pressure adjusting method: pressure up, heel block adjusting the rolling line elevation.
Levelling method: dry reversing

II. Components:

1．Loading car 1 set

2．uncoiler(including saddle, OBBS) 1 set

3．Entry side uncoiling knife, turning roll, pinch roll 1 set

4．Entry/exit side strip clean device 1set

5．Anti-wrinkle roll 2 sets

6．2-hi reversible dry type main skin pass mill 1 set

7．Roll changing device 1 set

8．Exit turning roll, pinch roll, guiding plate 1 set

9．Coiler(including saddle, OBBS) 1 set

10．Unloading car 1 set

11．Belt wrapper 1 set

12．Paper winder/unwinder 2 sets

13．Hydraulic system 1 set

14．Thin oil lubrication system 1 set

15．Electric control system 1 set

III．Product list