Home > Products > Servo Motor Drive > Winding Machine 1.5kw Speed Digital Servo Drive Brake Resistor Built In
Winding Machine 1.5kw Speed Digital Servo Drive Brake Resistor Built In
- 0 Piece / Pieces per Month
- T/T L/C D/P D/A
- 7 days
You May Like
-
Three Phase AC Servo Motor Drive 23bit Incremental Encoder Vector control
-
Air - jet Loom 3.5KW Speed Control Servo Motor Drive Computer Numerical Control
-
Shuttle Loom Position Control Industrial Motor Drive Three Phase 5.5KW
-
600W Two Phase AC Servo Drive A / B Pulse Input For Wool Spinning Machinery
-
Glove Machine 2KW Torque Brushless Servo Amplifier With Resonance Inhibition
-
Embroidery Machine 2KW Speed AC Servo Drive With Defensive Function
Product Details
| Brand Name | Maxsine | Place of Origin | China | |
| Model Number | TL15-B0S0 |
Product Description
Certification:CE / ISO9001
Winding Machine 1.5kw Speed Digital Servo Drive Brake Resistor Built In
Description:
There are 16 models in this series with power range from 0.1kw to 7.5kw.?EP1C PLUS is the fifth generation of Maxsine servo drive. This high-speed and high-precision servo drive is widely used in industrial automatic field.?
Characteristics:
1. EP1C Plus Series software compensates torque ripple, to effectively improve the torque accuracy.
2.?Differential drive connection can support 1M pulse input / single-ended drive optional (convenient for PLC connection). Both instruction input and feedback output frequency can reach 1Mpps, which can achieve high resolution running. Special order version supports 24V NPN/PNP single-ended drive with the highest frequency 200kHz.?
3.?Set notch filter, which can greatly reduce the noise and vibration caused by mechanical resonance of the device, to achieve quick response action. There are 2 notch filters to set the frequency of 50~1500Hz, which can be done a deep adjustment.
4.?Control Model: Position, speed, torque, speed trial run, and JOG trial run.
5.?Optional incremental encoder, wire-saving encoder, absolute encoder and resolver.
6.?Strong protection function, abundant control models and higher performance.
?Specifications:
| Model | TL15-B0S0 | ||
| Input power supply | Three-phase AC 220V -15%～+10% 50/60Hz | ||
| Environment | Temperature | Operation:0℃～40℃ Storage:-40℃～50℃ | |
| Humidity |
Operation:40%～80%(non-condensing) Storage:93% or less(non-condensing) |
||
| Atmospheric pressure | 86kPa～106kPa | ||
| IP rating | IP20 | ||
| Control of main circuit | vector control | ||
| Regeneration | Built-in/built-out | ||
| Feedback type | 23bitINC/ABSencoder | ||
| Control modes | Position, Speed, Torque | ||
| Digital inputs | Five programmable input terminals (optical isolation)Function SRVON ,ACLR ,CW Drive inhibition,CCW Drive inhibition,CW Torque inhibition, CCW Torque inhibition,Emergency Stop,Electronic gear selection 1,electronic gear selection2,Position deviation clear,pulse input inhibition | ||
| Digital outputs | 3 Programmable input terminals(Optical Isolation) Function:SRDY,alarm,Finish Orientation Output,Reach Speed,electro-magnetic brake,Torque restrictions | ||
| Encoder signal outputs | A,B,Z Differential output,Z signal open-collector output | ||
| Position | Input frequency | differential input:≤1000kHz(kpps), single-ended input:≤200kHz(kpps) | |
| Command modes | Pulse+Signal,CCW Pulse/CW Pulse, orthogonal Pulse | ||
| Electronic gear ratio | 1～32767/1～32767 | ||
| Speed | Analog command input | -10V～+10V, Input impedance10kΩ | |
| Acceleration/deceleration command | Parameter setting | ||
| Command source | Analog quantity | ||
| Torque | Analog command input | -10V～+10V,Input impedance 10kΩ | |
| Speed limit | Parameter setting | ||
| Command source | Analog quantity | ||
| Monitor function | Revolving Speed,Current Position,Positional Deviation,Motor Torque,Motor Current,Instructions Pulse Frequency,busbar voltage,internal temperature of module etc. | ||
| Protection function | Overspeed, Overvoltage,Overcurrent,Overload,Abnormal of main Power,Abnormal Encoder,out of tolerance etc. | ||
Applications:
