Home > Products > Servo Motor Drive > Reeling Machine 500W Servo Motor Drive Position Synchronous Motor Driver
Reeling Machine 500W Servo Motor Drive Position Synchronous Motor Driver
- T/T L/C D/P D/A
- 7 days
You May Like
-
800W Speed Control Servo Motor Drive For Textile Instrument Defensive Function
-
High Power Servo Motor Drive 50Hz / 60Hz 1000W Pulse And Symbol Input
-
Winding Machine 1.5kw Speed Digital Servo Drive Brake Resistor Built In
-
Three Phase AC Servo Motor Drive 23bit Incremental Encoder Vector control
-
Air - jet Loom 3.5KW Speed Control Servo Motor Drive Computer Numerical Control
-
Shuttle Loom Position Control Industrial Motor Drive Three Phase 5.5KW
Product Details
| Brand Name | Maxsine | Place of Origin | China | |
| Model Number | TL05-B0S3 |
Product Description
Certification:CE / ISO9001
Reeling Machine 500W Servo Motor Drive Position Synchronous Motor Driver
Description:
EP1C PLUS is the fifth generation of Maxsine servo drive. High-speed and high-precision servo drive is widely used in industrial automatic field. There are 16 models in this series with power range from 0.1kw to 7.5kw.
Characteristics:
1.?Set notch filter, which can greatly reduce the noise and vibration caused by mechanical resonance of the device, to achieve quick response action. There are 2 notch filters to set the frequency of 50~1500Hz, which can be done a deep adjustment.
2. Vibration filter can remove the natural vibration frequency, and sharply reduce the swing of axis when stops. Applicable frequency is 1-100Hz.
3. EP1C Plus series servo standard analog is with common 12bit resolution. 16bit high accuracy analog is optional. Thus, this series can meet the requirements of both high accuracy analog and common accuracy analog.
4.?More stable, rich and complete data
5. Newly increased 485 communication function , more convenient and reliable in connection with upper computer software and controller.
6. Single-power supply, simplify power supply , convenient to wiring and save cost.
?Specifications:
| Model | TL05-B0S3 | ||
| Input power supply | Single phase AC220V -15%～+10% 50/60Hz | ||
| Environment | Temperature | Operation:0℃～40℃ Storage:-40℃～50℃ | |
| Humidity |
Operation:40%～80%(non-condensing) Storage:93% or less(non-condensing) |
||
| Atmospheric pressure | 86kPa～106kPa | ||
| IP rating | IP20 | ||
| Control of main circuit | vector control | ||
| Regeneration | Built-in/built-out | ||
| Feedback type | 23bitINC/ABSencoder | ||
| Control modes | Position, Speed, Torque | ||
| Digital inputs | Five programmable input terminals (optical isolation)Function SRVON ,ACLR ,CW Drive inhibition,CCW Drive inhibition,CW Torque inhibition, CCW Torque inhibition,Emergency Stop,Electronic gear selection 1,electronic gear selection2,Position deviation clear,pulse input inhibition | ||
| Digital outputs | 3 Programmable input terminals(Optical Isolation) Function:SRDY,alarm,Finish Orientation Output,Reach Speed,electro-magnetic brake,Torque restrictions | ||
| Encoder signal outputs | A,B,Z Differential output,Z signal open-collector output | ||
| Position | Input frequency | differential input:≤1000kHz(kpps), single-ended input:≤200kHz(kpps) | |
| Command modes | Pulse+Signal,CCW Pulse/CW Pulse, orthogonal Pulse | ||
| Electronic gear ratio | 1～32767/1～32767 | ||
| Speed | Analog command input | -10V～+10V, Input impedance10kΩ | |
| Acceleration/deceleration command | Parameter setting | ||
| Command source | Analog quantity | ||
| Torque | Analog command input | -10V～+10V,Input impedance 10kΩ | |
| Speed limit | Parameter setting | ||
| Command source | Analog quantity | ||
| Monitor function | Revolving Speed,Current Position,Positional Deviation,Motor Torque,Motor Current,Instructions Pulse Frequency,busbar voltage,internal temperature of module etc. | ||
| Protection function | Overspeed, Overvoltage,Overcurrent,Overload,Abnormal of main Power,Abnormal Encoder,out of tolerance etc. | ||
Applications:
