Industrial Boiler Flue Gas Desulfurization Equipment Easy Installation

Production Description

Flue Gas Desulphurization system (fast-assembling type) is the improvement of traditional granulite water film desulphurization dust collector, with outer lining steel plate, inter lining granite, and middle acid-resistant castable. 1-2 parts are separated transport to site after manufacturing, and assemble at site. It has the advantages of easy installation and short construction period, which is the idea product for boiler and furnace gas desulphurization treatment.

Types of Water film Dust Collector

? Single Tower Water film Dust Collector

? The Main-vice Tower Water film Dust Collector

? Parallel Water film Dust Collector

? Integrated Water film Dust Collector

Singer Tower water film dust remover is mainly composed of the main cylinder, the overflow tank and water coil, spillway hole, slag hole, flue gas import and export, etc. The equipment is separated into modules and assembles at site. The construction period is short.

Accessories

The sink is sintered by acid-base resistant, heat resistant ceramic materials. It adopts block overflow structure and the inner side of shell is smooth, thus reducing the water consumption.

Precautions

1 Before operation, ensure smooth water supply system and open all the valves; Start the pump to inject water inside the tower till great amount of water spills out the overflow port.

2 Start operating induced draft fan; when the boiler shuts down, stop the induced draft fan for some while and then cease supplying water to the device. During operation, water-break and dry burning shall not be allowed inside the towel.

3 Check and clean the dust and slag in sedimentation tank on regular and frequent basis, maintain the quality of recycling water and ensure effective space for sedimentation tank

4 Check the PH value of water in circulating pool regularly, it is suggested that water in sedimentation tank shall be in alkaline condition (PH value shall be kept between 9 and 10)

5 Open the access hole on the towel periodically (generally three to five months), check and clean the dust in time.

6 In case of the intermittent burning in boilers and high density of dust because of the insufficient sediment caused by the small size of water sink, there will be more pressure on the dust collector, adding increasing load on the boiler. It is necessary to check if there is dust in venturi, the inlet of water film desulfurization dust collector and the elbow of back pass and clean it immediately.

Q & A

1. Are you manufacturer or trade company ?

We are professional manufacturer, specializing in produce many kings of collectors for more than 15 years, competitive with excellent quality.

2. How to purchase dust collector ?

Firstly, we appreciate if you could kindly provide following information to us.
1) Filter used for what industry.
2) How much is the filtering area and air volume.
3) You'd better give us your workshop