Good Performance Fluorite Powder Briquette Machine

Fluoritepowder briquette machine

1. 1.    Productintroduction:

Fluoritepowder pressure ball machine after years of industrial use and improvement,compared with other similar products, fluorite powder pressure ball machinewith ball rate is high, and the consumption power small, compact and easy tomaintenance and debugging advantages is an ideal pressure ball, granulatingequipment.

Fluoritepowder pressure ball machine with briquette ball press machine, desulfurizationgypsum pressure ball machine performance is similar, cocoa of fluorite powder,slag, metal powder, coal, coke powder and other materials suppression, shapethem. Has good wear resistance due to the on and forced extrusion, so theproducts with high density, high strength, high hardness of the threecharacteristics, and the machine pressure and the 650mn hard materials. It caneffectively improve the service life of the roller.

1. 2.    Workingprinciple:

Formingmachine is the key structure of fluorite powder press, its design is reasonabledirectly affects the quality and taste of fluorite powder. Fluorite powderpressure ball machine, molding machine main models is the roll forming machine(that is, people often say that the pressure ball machine), it has a pair ofaxis parallel to each other, the same diameter, each other a certain clearanceof cylindrical type wheel, wheel has hemisphere with the same shape and sizeand regular arrangement of the fossa, wheel type is fluorite powder pressureball machine molding machine main parts. Under the drive of the motor, two typewheel with the same speed, rotating in opposite directions, when material fallsone type two wheel at the combination is being pressed. At this time, the rawmaterial between the two corresponding ball produced volume compression; wheeltype continuous rotation, ball and socket are gradually closed, moldingpressure gradually increased, when the rotating two ball distance the leastmolding pressure reaches is the maximum. Then type wheel to rotate andgradually separated, forming pressure decreases rapidly with the. When themolding pressure is reduced to zero, the fluorite powder is pressed to startthe expansion of the separation, complete fluorite powder press ball machine tosuppress the whole process of fluorite powder into the ball.3.

1. 3.    Materialrequirement:

2. 1.Materialgranularity in 80-200 mesh.

3. 2.Materialis not allowed to have any metal; otherwise it will damage the surface of theroller.

4. 3.Feedmust meet, so the ball will guarantee rate. Need to remind the user is that ofmetal powder press the ball into the group, on the leather roller wear isrelatively severe,   users in thepurchase of fluorite powder pressure ball machine, special attention should bepaid to the material of the leather roller, the best selection ofwear-resistant alloy forging.

1. 4.    Installationand commissioning:

2. 1.Attentionshould be paid to the vertical and horizontal vertical.

3. 2.Fluoritepowder ball pressure machine equipment should be installed in the level ofconcrete foundation, fixed with anchor bolts.

4. 3.Afterinstallation, check the bolt of every part of the fluorite powder press,whether it is loose or not, and whether the main door of the machine isfastened.

5. 4.Powerline and control switch for power distribution according to the device offluorite powder press.

6. 5.Inspectionis completed, the empty load test, the normal test can be carried out.