Aluminum Case Smd5050 Digital Pixel Full Color LED Rigid Bar Outdoor Use

Brand Name	NFCase		Place of Origin	China
Model Number	AIA-1

Delivery Time:3-5 days
Certification:CE,FCC,MSDS

Aluminum Profile Smd5050 Digital Pixel Full Color LED Rigid Bar Outdoor Use
?
Features:

This LED rigid bar is full addressable so it can be cut every LED.The LED is the most popular chip WS2812,?WS2811 chip build inside SMD 5050 RGB.?Aluminum housing with?epoxy waterproof?IP65, both side of bar output the waterproof?3Pin connector.Every 1 meter bar include 2pcs metal clip(for installation use), 1pcs T type connector(every 5m).PCB Color:?White and Black are available, PCB Width:?15mm.Control: SD controller ,DMX Decoder, Artnet,etc.Waterproof, energy-saving, low-cost of maintenance, and long life span.Length: 0.5M, 1M, 1.5M,2M or customizedIt is very cool for LED signs, whole building decoration,stage.Aluminum ?casefully addressable ws2812b full color led rigid bar for building

Product Name	WS2812B 60 pixels led bar light
Model Number	SJ-10060-2811
Voltage	DC5V input
Power	14.4W/M
LED Qty	60 leds/m
IC Chip	ws2811 built-in 5050 RGB LED chip
Size/mm	1000*20
PCB Width	15mm
PCB Color	Black/White
Connector	3Pin waterproof connectors
IP Rate	IP20,IP65 epoxy waterproof, milky/ clear cover
Warranty	2 years

?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
Instructions:
?
1. Compatible 12V power supply
An?LED?5Volt?Driver?is?required?to?power?the?LED?rigid?bars.?They?are?available?to?buy?with?the?LED?bar?on?this?page?or?can?be?purchased?separately?in?our?LED?driver?department?where?we?also?sell?waterproof?drivers.?Each?metre?of?LED?rigid?bar?requires?14.4?watts?of?power?so?choose?a?driver?powerful?enough?to?supply?the?total?watts?required.
?
2. Connection:
1) Signal wire: DC+,GND,DAT,
2) DC+ and GND connect to power supply;DAT connect to controller
3) Relative Controller: SPI controller support LPD6803; when use DMX decorder, can connect to DMX system
4) Support online control
?
3. Installation:
Each?light?bar?is?supplied?with?2?metal?clips?-?screw?the?clips?to?a?surface?then?push?the?light?bar?into?the?clips?to?secure.
?
4. CE?and?ROHS?approved?to?comply?with Europe safety?regulations.
Pictures:

?
Note:
1.?Indoor and oudoor using?
2. Turn off the power before installment, don\'t touch the surface of the lights when light on?
3. Please make sure using in the normal environment
4. To avoid using nearby the hot or heat source place,where has the corrosive gas.
5. Make sure the installment place could afford 10 times of the weight of light.
6. Installed position must be no shock, no fire hidden danger
7.?Do not touch or/and knock the product body during working
?
Trade Term:
?
1. Payment: T/T ,?? (Western Union? is welcomed)
2. Production lead time? for 100~500pcs: 5-7days, 500~1000pcs:7-15days
3. Sample can be delivered in 3days
4. By Express(EMS, DHL, UPS etc), By Air or By SeaShipping freight are quoted under your requests
5. Shipping port: Shenzhen/Guangzhou, Mainland China
6. Logo:??According to your requirement
7. Discounts are offered based on order quantities
8. MOQ:5pcs, Welcome sample order
?