DR-QD05 Cone Pneumatic Marking Machine

Product Configuration:

1, host: with two-dimensional bodies, Z-axis lift table;

2, the control box: line marking machine drives.

3, PC: compatible PC, 17-inch color display. (Optional)

4, CNC rotary fixture

Application areas:

1, It can be printed text and graphics in label and parts of the plane.. (Remove the rotating fixture)

2, It can be printed text and graphics in parts of the arc surface that numerical - control jig rotary control computer rotation , which can print marking of  rotate 360 degrees that the computer is automatics compensate .

3,It can be printed scale of cone-shaped object and can be optional breakdown of  circle at the same time marked with numbers. Digital display is also diversification.

Description:

As marking machine part of head can be 0 ~ 90 degree rotation so you can make marking needle in a tilted state to print parts of the slope. Cooperate with numerical-control rotary jig of rotation can be printed vertebral part.

Performance parameters: DR-QD05 Cone Pneumatic Type Marking Machine

Marking format: 150 × 100 (mm)

Marking Depth: 0.1-2mm (depending on material)

Marking Speed: 7 seconds to complete 7 5 characters

Needle Hardness: 92HRA

Machine Power Consumption: 220V ± 10%, 50Hz 300W

Air source requirements: 0.2-0.5Mpa

A needle frequency: 100 times / sec

CNC rotating head: The 125 standard chuck, clamping diameter of 125mm.

Performance parameters: DR-QD05 Cone Pneumatic Type Marking Machine

Marking format: 150 × 100 (mm)

Marking Depth: 0.1-2mm (depending on material)

Marking Speed: 7 seconds to complete 7 5 characters

Needle Hardness: 92HRA

Machine Power Consumption: 220V ± 10%, 50Hz 300W

Air source requirements: 0.2-0.5Mpa

A needle frequency: 100 times / sec

CNC rotating head: The 125 standard chuck, clamping diameter of 125mm.