DR-DBP50A lamp-pumped laser marking machine

Features:

Laser marking is the use of energetic laser beam focused on the material surface, the rapid vaporization of the material to form a pit. As the laser beam in the material surface of a pattern of movement, while controlling the laser off, the laser beam that is in material surface processing, has become a designated pattern. Laser Marking and the traditional marking process has obvious advantages marking speed, writing a clear, permanent. Any design of computer graphics text, flexible and convenient, without printing supplies, processing costs low, non-contact processing, little pollution, no wear and tear. Can do high-speed automated operation, low production costs, using high-speed scanning galvanometer international brands, high speed, high precision galvanometer speed of up to 7000MM / s; control software: A powerful, with a variety of fill effects, graphics alignment, hierarchical set the parameters and red light-bit preview, equipped with a variety of barcode marking and graphics, and an anti-play functionality. Cycle cooling system: using 2P chillers.

Application:

Metals, alloys and oxides, ABS, epoxy resin, printing ink and so on, are widely used in electronic components, electrical appliances, jewelry, glasses, hardware, auto parts, telecommunication products, plastic buttons, integrated circuits (IC) industry.

Application areas:

Widely used in automobile, motorcycle parts, aerospace components, integrated circuit chips, food, beverages and tobacco packaging, the phone keypad, battery, electronic components, computer parts and peripherals, hardware tools, stainless steel implement, electrical appliances, communication products , medical equipment, sanitary ware, watches, jewelry, industrial bearings, wire and cable, clothing accessories and many other fields of graphics and text markup.

Features:

Inexpensive, cost-effective

The key part of high-quality components, reliability, stability

Adopt red laser positioning system, positioning accuracy and high repetition precision

Cut-off Protection, and better to extend the life of laser

Equipped with foot switch, show the human-caring

Output power stable, work around the clock

Marked effect of sophisticated anti-counterfeiting and strong, never obliterate

Specifications

Lamp-pumped laser-pumped mode

Laser wavelength 1064nm

Laser frequency 0-50KHz

Laser power 50W

Q-mode acousto-optic Q -

Pulse width 20ns

Beam quality M2 <10

Maximum carving speed points / s 7000mm / s

Standard engraving range mm 100 * 100

Laser Head Number 1

Focal length 100mm

Focus diameter of 0.05mm

Marking characters minimum 0.3mm

Cooling Water

Wearing parts Kr lamp

Wearing parts usage time 800 hours hours

Applicable to metal and some non-metallic materials,

Device Input Power AC380V ± 10% 50-60Hz

Equipment power 5KW

The software in English and Chinese Marking Software

Engraving accuracy 0.005mm

Repeatability 0.005mm