DR-AY10 CO2 Laser Marking Machine

Features

CO2 laser is a gas laser, which produces a wavelength of 10.6μm, belonging to the mid-infrared band, CO2 lasers have relatively large power and relatively high electro-optical conversion efficiency, is the most powerful of a laser.

   CO2 laser , with CO2 gas as the working material, will be CO2 and other ancillary gas filled into the discharge tube, while increasing the height of the electrode voltage discharge generated glow discharge, we can release the gas laser, the laser energy will be released after amplification , we can carry out laser processing. Large laser power, power is controlled by software, continuously adjustable.

1, laser power high

2, power is controlled by software, continuously adjustable

3, a wide scope of marking

4, mark a clear, easy to wear, cutting efficiency is high

5, engraving free to control the depth of

6, processing costs are low, without supplies

Application of materials and industrial applications

A variety of non-metallic materials can be engraved. Applicable to leather, denim, Plexiglas, acrylic, wood, epoxy resin, unsaturated resin, non-metallic materials and so on. Widely used in leather, wood, fabric cutting, textiles, plastics, signage, architectural ceramics, medicine, rubber products, beverage packaging, crafts, gifts, electronic components, communications, watches, glasses, printing, shell plate, decoration and other industries. Marking the graphics clear and beautiful, without supplies, stable performance, The overall machine will last 30,000 hours maintenance-free .

Technical parameters:

Maximum laser power: 10W

Laser wavelength: 10.64μm

Laser repetition frequency: ≤ 50kHz

Standard engraving range: 110mm × 110mm

Engraving depth: ≤ 5mm

Engraving line speed: ≤ 7000mm / s

Minimum line width: 0.1mm

Minimum characters: 0.4mm

Repeat accuracy: ± 0.01mm

Total Power: 0.6KW

The demand for electricity: 220V / single phase / 50Hz / 3A