Ball Crusher

Operation Principle:

A tube body is installed ontwo large bearings by the ball crusher through the level way. The tube bodyturns round with low-speed to grind various materials. Some mediums used forgrinding exist in the tube body. Under the function of the friction force andthe centrifugal force, these mediums are elevated thrown down after repeatrotating in the tube body. At this time the materials those are needed to begrinded get in from the input. These materials will be shocked and grinded bythe moved grinding mediums. Finally the materials after being crushed dischargefrom the tube body through force of continuous feeding and overflowing.

Installation and run-in ofthe ball crusher:

1 This equipment should beinstalled on the foundation of level concrete and fixed with bay bolts.

2 The plumb between the mainmachine and the level should be paid attention while installing.

3 Check that whether thebolts in every position and the main machine door are fastened or not, fastenthem if not.

4 The electric cord andcontrol switch should be deployed according to the power of machine.

5 The empty-load run-inshould be carried out after installing. You can product with the equipment ifthe run-in is normal.

Operating Instruction:

1 The new installed hoopshould be regularly checked to avoid slipping out.

2 Check that whether parts ofthe machine work normally.

3 Pay attentions to theattrition rate of the wear parts and replace them if necessary.

4 If the oil temperature goesup, the machine should be stopped at once to find out the reason and clear out.

5 When there is impulsivesound during the operating of the transmitting gear, the machine should bestopped to check it.