PU Sandwich Panel Discontinuous Production line For Layers of Steel And Polyurethane

PU Sandwich Panel Discontinuous Production line For Layers of Steel And Polyurethane

Whole equipment includes Roll Forming Machine?and double-layer laminator part:

Ⅰ.Roll Forming Machine(Two sets for two profiles)

Details of Roll Forming Machines

Main Roller Forming Machines--------------Two SETS

1: Coil width: 1220/1100mm?? effective width: 1000mm

2: working speed: 12-15m/min (not contain cutting)

3: roll station: 20/13 stations

4: material of roller: grade 45 steel, polished and coated with chrome

5:material of main shaft:45﹟ steel?? diameter roller: Ф70mm

6: main power: 5.5KW??

7: forming thickness: 0.3mm—0.8mm zinc and color steel, G250MPA

8: Transmission: by single Chains 1.0 inch

9: feeding and guide: surface polished and coated with chrome

10: machine drive parts adopt protect cover

11: machine adopt new station with chrome

12: size of main machine: max 8000x1300x1200(mm)?? L x W x H

13: weight: about 5500Kgs

14: color of machine: blue (also can choose by customer request)

15: machine should be with four legs (made from metal) in 350mm

16:???? Cutting:???

(1)Hydraulic Cutting after forming: Cut the sheet after roll forming to required length

(2) Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.

(3) Material of blade: CR12with heat treatment

(4) Length measuring: Automatic length measuring

(5) Tolerance of length: 3m 1.5mm

Uncoiler For Material? Feeding --------------Two SETS

Ⅱ. PU insulation part

Specifications of sandwich panels producible:?

?Max. length?? 6000mm

?Max width???? 1000mm

?Thickness???? 30mm

?Equipment used

1. One “1+1” double-layer laminator for steel Panel

2. One set of PU foaming machine?

Operating principle

The sandwich panel consists of double layer CORRUGATED panel,the foam will be between these panels.

The double-layered laminator is consisted of the press and the rail stands.Initially, put the top and the bottom facing sheets inside of mould frames and then do the necessary sealing work. After that, feed the worktables into the press. When worktables inside the press moves out orderly, the other two feed in at the same time. Upon the finish of feeding, the press will close and slant at a angle, waiting for the injection PU raw materials from the PU mixing head into different panels. Meanwhile materials start foaming and curing. At this time, mould frames on worktables moved out can be opened and the finished products can be unloaded to get ready for next production cycle.?

Constituents of equipment

a. One “1+1” double-layer laminator for CORRUGATED panel

???? The laminator is used to make sandwich panels with the max. lenth of 6m, max. width of 1.0m and the thickness 30mm.

1. Main technical parameters

Thickness of a sandwich panel????? 30mm

Max bearing force?????????????? 0.2Mpa/cm2

Moving speed of worktable??????? 15-20m/min

Pressing speed????????????????? 10~30mm/s

Working temperature of worktable?? 0~50℃

2. Main machine

To be made up of the frame, chassis, slanting mechanism, rails and beam.

2.1 Worktable

Worktables are made of extruded aluminum alloy.

worktable (is fixed),manual-feeding ,and mould locators are provided.

2.2 Worktable heating system

It is made up of the medium heating installation, pump units, pipes and suitable temperature control. (Two sets, one on the right, the other on the left)

2.3 Electric control system

Adopting central control by a panel, the system is equipped with fitting press buttons, relays, temperature control instrument, etc..

b.Hi-pressure PU foaming machine

Tank assembly:

Producing tank: Two 300L , maximum allowable pressure 0.4MPa. Each tank is with a 0.75kw agitator assembly and the safety valve, pressure-reducing valve, pressure gauge, three-position liquid-level control switch and fitting valves and pipes.

Automatic material-supplementing installation: two material-loading tanks included; material loading done either in an automatic or a manual way.

Material filtration part includes two wire-type filters.