High pressure superfine mill

Brand Name	Xinhai		Place of Origin	China
Model Number	XH

High pressure superfine mill

1)Product advantages
1.High output, low energy consumption
2.High fineness of end product
3.High security and reliability
4.Environment protection
5.One-off grinding is available via airflow and the conventional screening process is skipped

2)Product feature
1 The fineness of finished product can be adjusted
2 reasonable structure, extensive application
3 high efficiency of ore discharge 4 long working life

3)Product application
High pressure superfine mill, consisting of coarse crushing device, fine crushing device and airflow conveyance device, completes grinding process through high speed impact. It employs airflow to achieve the one-off grinding, skipping conventional screening process. High pressure superfine mill can be used to grind non-inflammable and non-explosive materials with Mohs hardness below 9.3 and moisture content below 6%, such as barite, limestone, pottery, scoria. Size of final products can be adjusted between 80-425 mesh (The fineness can reach 1000 mesh). High pressure superfine mill can produce coarse powder between 30-80 mesh by adding special equipment. This machine is widely used in the fields like mining, chemical industry, construction materials, metallurgy, etc.

4)Product principle
(1) When the materials enter the grinding room of the main body, the grinding roller swings outward and presses closely upon the grinding ring due to the centrifugal force generated by the rotation of the main shaft. (2) The blade carries materials to the space between the grinding roll and grinding ring, and materials are ground as the grinding roller rolls. (3) After being ground, the powder is selected by classifier via the cycle wind of the blower and the rough powder will be back to the grinding room for regrinding. (4) The qualified powder is brought into the powder collector together with airflow. The powder comes out as end products while the airflow goes back to the powder collector in cycling to make the machine work normally. The remained airflow comes out after purification by dust catcher