Anilox Roll Cleaner / Wash Solution

Roller Cleaner / Wash Solution

Model: TS-9800
Size: 550ml (Group A 500ml, B 50ml)

Packaging: plastic bottles (20 bottles / box)

Features:
1. Effectively remove residual stain to prevent blocking version
2. Results highlight the speed, to clean thoroughly

Uses:
Dry cleaning roller coating compound machine network points have been cured adhesive residue. Intaglio cleaning roller, cleaning anilox roller and so on.

Usage:
Was shut down after the daily cleaning of the anilox roller cleaning a timely manner, which can effectively prevent the ink dry on the net Xue Li. Mainly through the mesh softening and dissolving the ink to achieve the purpose of cleaning. First B copies (vial) into the Group A were (big bottle) mixed evenly, then use a small brush dipped in the mixture (cleaning agent) to wet coated rubber roller, in the At room temperature for about 20 minutes until there is a bubble powder appeared, and then brush or soft wire brush loose shape Material gently clean, if may still not go far enough, you can repeat it. At last, a wipe cloth dipped in clean water (or cotton yarn
Group) Kaishi until the clean up.

Note:

1. Group A Group B after matching the best use of time for 7 days.
2. Fractionated according to usage ratio of the Group A Group B (A and B ratio of 10:1).
3. Due to Group A special ingredients prone to freezing, the use of the former must be heated into a liquid, the ratio further use.
4. This product has stimulation, corrosion, operation, when you have to wear protective glasses and gloves well, and to prevent inhalation of steam.
5. Do not be splashed on the eyes or skin product.
6. If splashed on the eyes or skin, rinse immediately with plenty of water, and medical treatment.