Anilox Roller Cleaner For Ceramic Anilox roll

Spray ceramic/Metal anilox roll metal cleaning agent

Model: RT - 910
Packing specification: 1000 ml/tank (concentrate)

Scope of application:

This product is suitable for ceramic or metal roller  of daily maintenance and cleaning and maintenance.Flexo machine ceramic anilox roll, gravure roller, metal anilox roll and carton printing machine on the anilox roll and offset printing online glazing, offline glazing roller, etc.Apply to the anilox roll on the surface of the ink, glue, cleaning the UV and ordinary ink 

Characteristics:
Easy to use, aerosol type, namely the spray box, convenient and quick.
Cost savings, spray type design, uniform coverage, not cause waste.
PH: neutral.Won't cause harm to human body.

Method of use:

1. Spray directly on the roller, you can clean.
2. Difficult to clean the place, 2 to 5 minutes after injection with a special copper or steel wire brush to do in the ring wiping the surface of roller.
3. Old ink dirt, spray with a thin film after 12 hours and then wash package.

Notes:

This product should be stored in a cool dry place. Do not place this product at a temperature over 50 degrees or humid places; Do not puncture or put a fire tank; Do not touch the power supply, fire; Can not take, can not contact with the eyes; If spilled accidentally, immediately rinse with water.

Save: this product should be stored in a cool and dry place.
 
Note:
Do not place the product in more than 50 °C temperature or damp places, not tanks will prick or into the fire.Do not contact the power supply, fire, not subject to feed, can not contact with eyes.If not be careful to rinse with water immediately.