SP-751 700ml Anilox Roller Cleaner

700ml Anilox Roller Cleaner

Application performance:

ceramic anilox rollers in the flexo printing machine, offset printing machine glazing units, corrugated box printing machine, coating machine and other equipment is the key component, in printing, polishing, coating process of water ink, varnish, paint roller network points tend to gradually form a solidified layer and plug the network points, thus affecting the printing, polishing, coating effect. Blocking network points of solidified layer is generally difficult to remove it from the network in a hole clean. Japanese tricolor anilox cleaning agent, which is characterized in convenient use, obvious effect, does not need any auxiliary set, in a relatively short period of time to the network in a hole of ink, varnish, paint solidified layer removed, restored as a clean ceramic anilox roll, maintaining its original ink, coating effect.

Usage:

1.in the use of the cleaning agent before the user, please wear rubber gloves and protective glasses.

2., pay attention: cleaning of ceramic anilox roller surface is dry, if the roller surface with water, will affect the cleaning effect. Please be sure to use dry cloth to dry the water roller.

3. open the cleaning agent bottle cover, brush with the cleaning agent is uniformly coated on the surface of the roller, the cleaning agent must completely cover the roller surface, the coating thickness of about 0.5~1mm is appropriate. And then the cleaning agent bottle cap is screwed, so as not to affect the future use.

4.wait 15 minutes, then can discover oil ink cleaning agent has dyed. And special steel wire brush roller, the reciprocating rotation mode, gradually evenly across the surface brushing roller. The purpose of doing so is to let a cleaning agent network point at the bottom of the residual washing out. Then can use a small amount of water, rely on special steel wire brush roller brush wash step by step roller surface cleaning agent and residual condensate.

5, final reoccupy clear water is rinsed clean the roller surface, and the roller surface moisture to dry, you can see the cleaned roller presents metal ceramic color, the whole cleaning process to finish.

6. if found roller surface there are still a small amount of residual ink curing traces, the roller surface water to completely dry, repeat two~ four cleaning procedures, to save ink curing material traces of where to brush several time. At this time, will be able to get a clean ceramic anilox roller.

Origin: Japan

Manufacturer: Three Chemical Corporation

Brand: Pottery

Model: SP-751

Capacity: 20kg/700ml

Note: cleaning tools supporting imports of stainless steel wire brush, wire brush