♣ Other accessary machines for clay bricks production:

1. Box feeder

Box Feeder is the feeding equipment which is used to balance and ration during brick producing. It is applicable to various bulk and block materials with controllable feeding speed and feeding quantity. It is the first part of manual earth brick making machine.

2. High speed crushing machine:

High Speed crushing machine and wear on the roller machine is also a raw material crushing, squeezing, grinding equipment. The advantages of the device is low power, reasonable price, suitable for crushing clay raw materials. It is the second step of manual earth brick making machine.

3. Double-shaft mixer:

Double-Shaft Mixer is used to mix water with crushed raw materials, increase the comprehensive quality of raw materials, greatly improve appearance quality and ratio of forming, thus it is indispensable raw material processing machine for red mud brick making.

4. Strip cutting and blank cutting machine:

Strip Cutting and Blank Cutting machine is mainly used to cut mud which is squeezed from extruder into qualified red clay brick during sintering brick production. The cutter is the new vertical strip cutting and blank cutting system designed and deceloped by our factory which adopts advanced automatic PLC control, combing with photoelectric, close positioning, pneumatic and electric servo systems and etc. It has advanage of high accuracy, easy operation, and simple maintenance an so on.

Introduction of clay brick making machine south africa:

The clay brick making machine south africa, on the basis of absorbing and introducing the experiences at home and aboard, designed by our factory, is new type clay brick making machine south africa. The series of brick making machine is taking clay, shale, coal gangue, fly ash, mountain mud, silt, industrial tailings, sludge, etc. as raw materials, through crushing, mixing, brick making machine to make prescriptive cross-section of ordinary solid bricks, hollow brick and other products for building. Using the technology of our this clay brick making machine can recycle the wastes, save energy and reduce consumption, which has the obvious economic benefits and social benefits. 

The performance and features of clay brick making machine south africa:

1.Low noise when the machine working, low power consumption.
2.Automatic machine. After setting the size and strength of bricks, if the outlet bricks can’t reach the setted requirement, the unqualified bricks will return to the stock bin, after mixed, they will be pressed to the good bricks.
3.The machine adopts wear-resisting metal powder spray technology: the stirring shaft, twisted axis and body are processed by long time quenching.
4.The gear reducer is hard tooth face, and the clutch uses screw pressing patented technology, which improve the lifetime of our machine.
5.Reasonable design, compact structure, it can stable running without installing foundation bolts.
6.This machine can make solid bricks, big hole and large section of hollow bricks.
7.High efficiency, high extruding pressure, quick, convenient and reliable.

The parameters of clay brick making machine south africa:

 brick making machine production line

Clc brick making machine production line includes box feeder→ Roller crusher/ Jaw crusher→Double shaft 

mixer→ Finess crusher→ Extrudering mixer →Clc brick making machine → Brick slitter→ Brick cutter→

Brick Stacker→Kiln Car → Kiln.(clc brick making machine)

1. Raw material & fuel preparation and handling

 1)Send clay raw material to box feeder with loader. Send the clay raw material to double-roll crusher for

preliminary crushing .

 2)Preliminary crushed material is conveyed to twin-shaft mixing machine for adding water and agitating

through belt conveyer. 

 3)After mixing of the first working procedure, the raw material is again sent to intense agitation extruder

and high speed fine pulverizing double roll grinder for supplement water and agitating the raw material. 

(clc brick making machine)

 2. Molding

1)The molding water content rate should be controlled within 16%-18%. 

 2)The vacuum pump will take out the air that entered into the extruding machine together with pug. The

clc brick making machine will extrude the pug from machine mouth and then, carry out slitting & parting

according to the required dimension.(clc brick making machine)

 3. Drying

1)When the unfired bricks cut by cutter and arranged into groups. 

2) The drying chamber work system has heating system, regulating system and moisture excluding system.

The drying quality is controlled by regulating system. clay brick machine.(clc brick making machine)

 4. Burning

1)After drying , the unfired bricks are sent onto  kiln by the dried brick cart,stacking bricks onto the kiln car 

for burning. 

2)unloading system The properly burned bricks.(clc brick making machine)