Brief introduction of paving brick:

  Lantian Brand paving brick is a use of construction waste, stone, sand, fly ash, slag, smelting slag, wasteceramic materials such as adding a small amount of cement by hydraulic power production with the patterns and colors of the paving brick paving brick Zhuanji equipment.

Our features and advantages:
1. Rain erosion resistant.
2. Non-slip, Wear resistance.
3. No pollution , Ecological environmental protection.
4. Good at high temperature and cold temperature.
5. Various colors and sizes.
6. Convenient construction, Easy operation and easy to repair and maintain.

Advantages of Clement Brick Block Making Machine:

1. The main frames are welded by using high-quality steel and have the features of

low cost, reliable performance, rational structure, solid and durable properties, strong

adaptability, easy to operate, low energy consumption, high capacity, long service life

and easy to maintenance and so on.

2.  Introduce of foreign advanced technology. Make the forming moisture of the bricks

is 16-18% so that the bricks are easy to bake.

The structure and principle of Charcoal or Coal  Brick Machine:

(1) Main body: it consists of bedplate and engine base, which are the frame of the machine.
(2)  Rotating system: It is composed of motor, belt pulley, gear and tranmission shaft.
(3)  Feeding system: It is made up of rotating shaft, hopper and stirrer. The axial gear drive the stirrer, mixing the coal evenly and sending the coal into the former.
(4) Pressing system: it consists of 4 pcs slide bar, slide beam, punch, punch holder, punch head, pressrue plate, mould end and spring. When the machine working, the slide bar will drive the slide beam, punch head goes down and pressure plate will go up, then the spring retrench, then press the coal into briquettes.
(5) Discharging system: it consist of transmission rack, belt pulley, holder and conveyor belt. The conveyor betl driving and bring the shaped briquettes out of the machine. There is some roses on the transmission holder to adjust the tightness of conveyor belt.

Production Line Equipments of Cement Brick Block Making Machine:

Beside the Clay Brick Making Machine, our factory can also provide the auxiliary

equipments for the whole production process. Includes: box-feeder, crusher,

double-shaft mixer, roller screen, cutter, and some other devices. The following

are the main production equipments:

1. LTM series box-type feeder is the feeding equipment which is uesd to balance and

ration during brick production. It is applicable to various bulk and block materials with

controllable feeding speed and adjustable feeding quantity. (Interlocking Brick making

machine)

2. Futher crush clay and other raw materials by the roller fine crusher, until the raw

material size is ≤ 2 mm. Both ends of the fine crusher are equipped with regulating

pinched security block which are used to protect rolling circle and equipment. (Inter

locking brick making machine)

3. Conveying the fine clay powder into double-shaft mixer by belt conveyor, mixing

and blending with water to futher enchance the comprehensive plastic index of raw

materials. It is mainly used for watering and mixing treatment for clay, shale, coal

gangue, coal ash, and other raw materials. (Interlocking brick making machine)

4. After extruding, the wet long striped brick are cut into different size of pieces green

bricks by the automatic slitting cutter. (Interlocking brick making machine)

  1. Pre-sales service: