2016 New Improved 1200 wet pan mill in Africa gold mine

nude packs or in bulk or other standard packaging

2016 New Improved 1200 wet pan mill in Africa gold mine

The schematic diagram of the gold ore grinding mill , gold panning equipment,base on it, we made some improvements through the user' feedback

1. Wet pan mill introduction:

Wet pan mill used with gold, silver,  lead, zinc, iron, molybdenum,  copper,  antimony  mine, mine,  all ball mill  can be selected grind gold machine can be used.  Characteristics:  grind  gold  through the raw  material mixing, rolling, crushing, rolling  repeatedly  reach moisture  equilibrium ratio of uniform, low gas  content, improve the forming  rate  and  forming quality,  grind the material through the machine molding Products with high density, good strength, no porosity ratio weight. Energy efficient, high volume of output, the product is used for iron ore process tailings recovery, not to slag the loss of effective resources can be fully utilized.

2. Wet pan mill features

high yield, convenient to move, less consumption energy, moderate price, easy operation, it is a perfect machine for customers to beneficiation of gold, iron ore, zinc, lead.

3.Wet pan mill working principle and maintenance 

1. When the wet pan mill run properly then start  to feed the raw  material into the  grinding  pan.

2. The wet pan mill is prohibited to start work  with raw material inside.  When  the  machine break down then start again, it must to clean  the residual ore in  the middle of grinding  pan and then start the machine. 

3. Uniform feeding, shall not be more and less, it will be better to use the feeding machine. 

4. Bearing parts must often add butter. The reducer or rear bridge need to check whether lack of gear oil regularly.

5. Often check it the screw is loose.

6. If you found the bearing is damage, pls change it in time, just in case the eccentric shaft damage other components.

7. When the machine is on work, pls pay attention to the reducer and bearing part, to find it there generate abnormal noise, whether high temperature or high motor current accurs. It the find the above phenomenon, pls stop the machine immediately. 

8. When repair the machine, in order to ensure safety, pls remove the motor belt.

4. Wet pan mill main parameters:

Based on the original wet pan mill, here we made several big improvements:

The new type wet pan mill has smoother apperance, and better workmanship:

We combine the basin and the grinding pan together, for the new type placer gold wet grinding machine, the basin and grinding pan is one part, this improvement makes it easier to operate and highly improve the recovery rate of gold

The new type

The following is the old type, there is gap between the basin and the grinding pan, and the gold particles easily run into the bottom of the pan

The steel plate of our new type wet pan mill is thicker compared with the old type, making it more durable and  not easy to deformation

New improved wet pan mill in shipment to Africa

Welcome to visit our factory!

We have the best quality that can competitive with any manufacturer!

We have the lowest price because of we are real manufacturer!

Whatsapp:13027783958

    WeChat:13027783958

Skype:lilyjl11212