best hongfa Autoclaved Aerated Concrete block plant price , hebel light weight AAC brick production line

Specifications

          best hongfa Autoclaved Aerated Concrete block plant price , hebel light weight AAC brick production line

1.Brief introduction of best hongfa Autoclaved Aerated Concrete block plant price , hebel light weight AAC brick production line :

    Areated concrete brick (light brick ) is the light and porous buidling material. It has light weight keeping temperature cant burn and other advantages.it can be made into many kinds of bricks(for example:600×200×100,80×80×180,240×115×53,600×200×125),they could be used industry building and common building.they are more and more popular in the world.in the future,they will replace the Clay brick completely.

 2.Areated concrete common  conception of best hongfa Autoclaved Aerated Concrete block plant price , hebel light weight AAC brick production line :

     Common concrete density is usually 1600-2400kg/m3,but Areated concrete are 500kg/m3,600kg/m3,700kg/m3.It has not the big grain,main use silicon material (for example:coal ash,sand,stone dust and others ),through making the material small for example sand,they can be used directly if has enough degree of small (for example coal ash.Mixing  calcium material lime cement water to a special slop,then add the aluminum dust and the additive.Make the aluminum dust and the special slop have a Chemical reflect.then produce Hydrogen to make the concrete slop to expanding or swell,foam.Next,put them into the curing room to concreting cutting steaming curing,last,there will bacome the light brick,the porous rate is 70-80%.

3.Advantages of best hongfa Autoclaved Aerated Concrete block plant price , hebel light weight AAC brick production line :

     light weight

     Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay brick and  1/5 common concrete.So use the Light brick can reduce the weight of the build more,and also reduce the  beam of roof and pillar press best.then you can see,it can save the material and cost,it also fighting shaking.

     keeping temperature

     It has many  porous,the delivery hearting coefficient is 0.9-0.22W/(mk),the same as  1/4 or 1/5 of clay brick,so it is best  materials now in the world. Also many kinds raw material,have lowest wasteMain Material:coal ash sand waste mine material coal stone,stone dust and other silicon materials.

Main Raw Material:cement,lime ,gypsum , coal ash (fly ash), sand and other silicon materials.

AAC Block Production Line of Hongfa

   *We are one of the best AAC block production line manufactures in China. We have exported our production lines to many countries --Russia, Vietnam, Indonesia , Ukraine , Middle East and so on.

   *We can supply our customer for designing project, production, installation, commissioning, training and good after-sale service.

   *The capacity of AAC block production line which we can design is 30,000 ~500,000 cubic meter per year.

The main process of produce: best hongfa Autoclaved Aerated Concrete block plant price , hebel light weight AAC brick production line

1, Agglomerate lime is firstly crushed by jaw crusher, and then the granule lime is milled by energy-saving mill.

2, Mixing the fine grinding sands and the waste slurry for the slurry can improves effectively the stability of the slurry.

3, The slurry and powder are weighed by electronic measurement. The measurement and pouring of batching plant are controlled by central control room.

4, The pouring method adopts fixed point pouring.

5, It chooses the JQF4.2 step by step cutting machine (Made in China). The maximum cutting size is 4.2×1.2×0.6m ,and the capacity of the cutting machine is about 200,000 m3 per year and choose JQF6.0 for 300,000m3 per year ,the maximum cutting size is 6.0×1.4×0.6m , The cutting precision reaches the China advanced level among the same size.

6, The autoclave kettle adopts 2 upward acting doors to decrease the time of the brick in and out of the autoclave and saves construction areas.

7,Using the integrated process layout, it is conductive to building warm insulate and automatic control of the line. At the same time ,it reduces the cost of construction.

8,Using hydraulic transport system instead of travelling crane can improve the stability of the system and save the procedure of application for inspection.

9,The waste on the bottom is cleaned by the hanger with cleaner and then sent to the autoclave kettle for autoclaved maintenance to realize no hard waste for production.

10,Comprehensive utilization of the waste material, waste water, waste gas and rain water helps make full use of the source and reduce emissions.

11,In order to simplify processing and reduce the cost of production, manual work is needed to clean and oil the molds.

The production line is composed of raw material silo ,belt conveyor, ball mill, slurry storage tank , beater ,mixing and pour machine , mold , grouping conveyance mechanism ,cutting machine ,turnover conveyor device and tilting hoist, steam generating system(boiler),autoclave , steam distribution system , production conveyor device and production hoist and so on.

(1) Raw material silo

(2) Ball mill

  (3) Crusher 

(4)Pouring mixer

      The pouring mixer is mainly to make measured the slurry ,ash and aluminum suspending liquid into mixing drum ,the pouring slurry after mixed will be poured into mould through discharge Butterfly valve to maintenance ,the machine adopts helical blade in draft tube for mixing type, it can make kinds of material mixing uniformity effectively.

(5) Cutting machine

      The tilting hanger turns the mould 90 degrees in the air, demould the blank and puts it on the cutting table together with the side plate .The blank on the cutting table is cut by the longitudinal cutting device through the motor and its own running .After completion and running at the pause position ,the blank is cut horizontally by the cross cutting device when it is driven by the motor to the center of the blank .The cross cutting holder drops and cuts vertically from up to down until it is reset upward.

(6) Overturned demould spreader and grouping hoister

     Overturned demould spreader is installed in green body transport machine, the lift and overturn of spreader is controled by hydraulic station ,overturn spreader make the green body, mould ,side plate overturned rotated 90°,hoisting in cutting platform or cutting trolley, after demould ,green body can be cutted ,overturned demould spreader make the mould and side plate fold ,and make mould put into the rail.

(7)Autoclave

AAC block green body will be steamed in autoclave kettle and get high strength.

   Built from 1990, 4 factories in China, 39 branches in the world.

   Block machine , AAC brick production line , Concrete batching plant Market share as first in China.

See what company you will work with:

(1)  A professional supplier of block machinery over 23 years.

(2) Completely Production Line. From Raw Material to Delivery, all links are under our control .The price based on the best quality .Ever exported to more than 76 countries and area.

(3) Have already get BV, TUV, SGS, ISO9001,CE...Certifications . We are  "China FAMOUS TRADE MARK" .We have the best after-sales service in China.

Service:

We can supply our customer for designing, production, installation, commissioning, training and good after-sale service.

Capacity: from 50000 cubic meter to 300,000 cubic meters per year.

(1)Cement, lime ,fly ash style aerated block raw material proportion

(2) Cement, lime ,Sand style aerated block raw material proportion

Reference: cement is 42.5 Portland or 42.5 common cement,Aluminum power paste calculate to use according to 600kg/m³  

Remark: the accurate batching rate is adjustable according to the raw material locally.  Please tell me the annual capacity and which type aac brick line (sand or flyash) you need .Then I will send a quotation to you .

Welcome customers and merchants all over the world come to visit our company, establish a long-term collaboration with each other.

Sales manager: Ken Zhang           Skype: kenzhang009         TEL:0086-18315759901