Hebel autoclaved aerated concrete block plant , autoclaved aerated concrete block factory in Indonesia , AAC light brick machine

Brief introduction of Hebel autoclaved aerated concrete block plant , autoclaved aerated concrete block factory in Indonesia , AAC light brick machine :

 1,introduction of Hebel autoclaved aerated concrete block plant , autoclaved aerated concrete block factory in Indonesia , AAC light brick machine :

Aerated concrete brick (light brick ) is the light and porous building material. It has light weight, keeping temperature ,unburned  and other advantages .It can be made into many kinds of bricks(for example:600×200×100,80×80×180,240×115×53,600×200×125),they could be used industry building and common building .The size of brick can be changed by the requirement. They are more and more popular in the world .In the future , they will replace the clay brick completely.

2, Aerated concrete common conception of Hebel autoclaved aerated concrete block plant , autoclaved aerated concrete block factory in Indonesia , AAC light brick machine

Common concrete density is usually 1600-2400kg/m3,but Aerated concrete are 500kg/m3, 600kg/m3, 700kg/m3.It has not the big grain ,main use silicon material (for example :coal ash ,sand ,stone dust and others ),through making the material small for example sand ,they can be used directly if has enough degree of small (for example coal ash .Mixing calcium material lime cement water to a special slop ,then add the aluminum powder and the additive .Make the aluminum dust and the special slop have a chemical reflect .Then produce Hydrogen to make the concrete slop to expanding or swell ,foam .Next ,put them into the curing room to concreting, cutting, steaming curing .last ,they will become the light brick ,the porous rate is 70-80%.

 3,Advantages of Hebel autoclaved aerated concrete block plant , autoclaved aerated concrete block factory in Indonesia , AAC light brick machine :

   (1)light weight

     Aerated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay brick and 1/5 common concrete .So use the Light brick can reduce the weight of the build more ,and also reduce the beam of roof and pillar press best .Then you can see ,it can save the material and cost ,it also fighting shaking.

    (2)thermal insulation

     It has high porosity. The delivery heating coefficient is 0.9-0.22W/ (mk),the same as  1/4 or 1/5 of clay brick ,so it is the best materials now in the world. Also have many kinds of raw material , have the lowest waste

     Main Raw Material: cement, quicklime , gypsum , coal ash (fly ash) , sand and other silicon materials.

Installation service:

(1)My company could send our engineers to buyers' place to design the factory , direct the installation and give the operation training.

(2)The customers should pay for the cost of visa , hotel and board, and the round-trip tickets for our engineers.

Dear my friends, to save your valuable time, please kindly add informations as follows in your inquiry:

1.The exact the annual capacity you need;

2.Raw material (sand or flyash)

3.Industrial electricity voltage of your country (? volts , ? Hz ,)

Welcome customers and merchants all over the world come to visit our company, establish a long-term collaboration with each other.

Sales manager: Ken Zhang     

Skype ID: kenzhang009

Mobile Phone: +86-18315759901  

Wechat (QQ) : 980913098

Viber , whatsapp ID: +86-18315759901