China factory price carbon steel vertical bucket elevator for lifting bulk material

China factory price carbon steel Vertical bucket elevator for lifting bulk material

Vertical bucket elevator for lifting bulk material is designed basis the nation relevant standard, and adopts gravity to unload material. It uses plate type bushed roller chain as the drag part, and is suitable for to transport the materials which pile up the specific weight is not more than a 2t/m3,or the piece degree is 55mm, 50mm or 110mm, and the material temperature is not more than 250 degrees, such as piece coal, crushed stones, mineral stone, egg stone and so on. The capacity is 16~480m3/h, the lifting height is 5~40m.

Specification

1. We have rich production experience of Vertical bucket elevator.
2. WIth a large capacity.
3. Carbon steel structure. 
4. ISO,TUV, SEW, FLENDER.

Product Application

Vertical bucket elevator has become a widely used equipment for bulk material transportation, it is widely used in CEMENT,metallurgy, building materials, electric power, chemical, coal, port, wharf, mine, oil, food, feed and other industries.

Main Features

1.Vertical bucket elevator with Simple structure ,easy in installation and maintation.
2.The heat resistant steel as the main parts make it handle high temperature big bulk density materials.
3. Running in a high automatization.
4. Vertical bucket elevator Can be loaded and unloaded on multiple points.

Machine Parts

Name: Chain

Brand: YIJI

Original: China

1. Take tempering, carburizing and other heat treatment, improve wear resistance.
2. High quality stainless steel material.
3. With high temperature resistance and high tensile strength.

Main Features

Name: Buckets
Brand: YIJI
Original: China

1. Carbon steel material.

2. With high temperature resistance and high tensile strength.

Plugging alarm device

Device Type: A059

Switch Type: Limit switch

It is installed on the end cover plate of the head. When the material height exceeds the set value, the alarm signal is sent out to control the height of the material layer.(See red part in the picture.)

Speed Sensor

Device Type: A032
Switch Type: Proximity switch
 It is installed in the tail of the tail shaft and tail shaft to rotate together. When the speed exceeds the set range, it transmits a signal to the control system, so as to control the start and the stop of the motor to protect the equipment operation.