Wear resistant large capacity bucket elevator for silo storage elevation

Wear Resistant Large Capacity Bucket Elevator for Silo Storage Elevation

TH series Bucket Elevator is designed and manufactured according to the national standard, with the round link chain as the dragging chain. There are two type of buckets: ZH type,(middle-deep bucket), generally suit for conveying those wet, easy to agglomerate, hard to thrown out materials, such as wet sand, foundry sand, fertilizer, alkali powder, etc. SH type (deep bucket) generally suit for conveying those dry, loose and easy to throw materials, such as cement, gravel, coal etc.

Specification

1. The Nation Standard maker of bucket elevator.
2. WIth a large capacity.
3. Carbon steel structure. 
4. ISO,TUV, SEW, FLENDER.

Product Application

Bucket elevator has become a widely used equipment for bulk material transportation, it is widely used in metallurgy, building materials, electric power, chemical, cement, coal, port, wharf, mine, oil, food, feed and other industries.

Main Features

1. Bucket elevator with Simple structure ,easy in installation and maintation.
2.The heat resistant steel as the main parts make it handle high temperature big bulk density materials.
3. Running in a high automatization.
4. Can be loaded and unloaded on multiple points.

Machine Parts

Name: Chain

Brand: YIJI

Original: China

1. Take tempering, carburizing and other heat treatment, improve wear resistance.
2. High quality stainless steel material.
3. With high temperature resistance and high tensile strength.

Main Features

Name: Buckets
Brand: YIJI
Original: China

1. Carbon steel material.

2. With high temperature resistance and high tensile strength.

Plugging alarm device

Device Type: A059

Switch Type: Limit switch

It is installed on the end cover plate of the head. When the material height exceeds the set value, the alarm signal is sent out to control the height of the material layer.(See red part in the picture.)

Speed Sensor

Device Type: A032
Switch Type: Proximity switch
 It is installed in the tail of the tail shaft and tail shaft to rotate together. When the speed exceeds the set range, it transmits a signal to the control system, so as to control the start and the stop of the motor to protect the equipment operation.