Wellknow Quartz Sand Rotary Dryer,Sand Dryer Manufacturer

Specifications

Wellknow Quartz Sand Rotary Dryer,Sand Dryer Manufacturer!

We are one of the leading manufacturer and exporter of Rotary Dryer. which is used in drying and cooling of materials that flow freely.

Method Of Drying :Sand Rotary Dryer, Belt Conveyor, Tray Dryer, Flaker-Roll Dryer, Flash Dryer, Fluide Bed) in industries many type drying equipment use like that drum dryer-roll dryer, tray dryer, flaker machine, fluide bed dryer, spray dryer, pnuematic dryer, bin dryer, belt dryer, vacuum dryer, freeze dryer,tray dryer flash dryer and many more.

Its dryer application is different and selected dryer is depended on material, process, cost of material, quantity of material and many more factor.

We are leading manufacturer of Rotary Dryer in zhengzhou city,henan province, China and we Supplied this supply this dryer in different city of whole china, and exporter industrial dryer in Sri lanka, Africa, Cairo, Egypt and other Devloping country countries. We are one of the reputed organization that is designing and developing top-notch quality Sand Rotary Dryers

The Sand Rotary Dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern. In some cases, a combination of direct-indirect heated rotary dryers are also available to improve the overall efficiency.

Brief Introduction Of  Sand Rotary Dryer 

  Sand Rotary Drye is suitable to dry metallic and nonmetallic mineral, clay in cement industrial and coal slime in coal mine,etc. Rotary dryer can be widely used to dry various materials, and it is simple to be operated.

Applications Of The Sand Rotary Dryer 

  Sand Rotary Dryer have many applications but are most commonly seen in the mineral industry for drying sands, limestone, stones and soil, ores, fertilizers, wood chips, coal, iron sulphate, filter cakes, sewage sludge, etc

Drum or Shell Variations Of The Sand Rotary Dryer

A Sand Rotary Dryer can consist of a single shell or many, though any more than three drums is not usually necessary. Multiple drums can reduce the amount of space that the equipment consumes. Multi-shell dryers consist of several concentric tubes. Multiple shells allow the dryer to be utilized in a more compact space. The drums are often heated directly by oil or gas burners. The addition of a combustion chamber on the entry end helps ensure efficient fuel usage, and that homogenous drying air temperatures. As the material moves through the rotating drum is heated and moisture released. Some dryers also offer the option to cool, clean, shred, and/or separate the dried material.

Combined Processes Of The Sand Rotary Dryer 

Sand  Rotary dryer is a kind of processing large amounts of material drying machine. Due to the reliable operation, good adaptability, high yield, widely used in metallurgy, building materials, food, chemicals, coal, medicine and other materials. Sand dryer belong to rotating cylinder dryer. Commonly adapted to the powder and granular materials, can also use the mixing material approach drying viscous paste-like material or high water content materials. Especially dry sand, TaiDa sand dryer effect is excellent. Sand dryer with advantages of great capacity of production, wide application, small flow resistance, convenient operation, etc.
Sand dryer structure
1. The cylinder
2. The front roller ring
3. After the roller ring
4. Gear
5. Gear roller
6. Drag roller
7. Small gear
8. The discharging part
9. Board
10. Speed reducer
11. Electric machinery
12. Hot air duct13. Feed chute
14. Furnace body and other components, and according to the user' needs to design gas furnace, the combustion chamber or the elevator, conveyor belt, quantitative feeder, cyclone dust collector, a draught fan, etc.we are leading manufacturers of sand dryer in ahmedabad, supplier in gujarat, india and exporter industrial dryer in shrilanka, Africa and other countries  

Sand Rotary dryer working principle

Sand sent to the hopper by the belt conveyer and bucket elevator, and thl angle of materials, so that material flows into the sand dryer. Dryer cylinder is a rotating cylinder that has a certain inclination with horizontal linen through the hopper feeder into the feeding pipe, thereby entering the feeding end. The feeding pipe inclination is greater than the naturae. Material from the high-end to join, heat carrier from the low-end entry, countercurrent contact with material, also have heat carrier and material flow into the cylinder together. With the rotating cylinder materials by gravity run to the lower end. Wet material in the cylinder body to move forward, heat by heat carrier directly or indirectly, so that the wet material to be dried, then at the discharge end through a belt or a screw conveyor send out. In sand dryer inner wall of the cylinder is provided with a copy board. Its role is to bring up material then down, increasing the contract surface of material and gas flow, in order to improve the drying rate and promote material progress. Heat carriers are generally divided into hot air, flue gas. Heat carrier through the dryer, then the material in the gas was collected by cyclone dust collector. If need to further reduce the exhaust gas dust content, also should dust by the bag dust collector.

Technical parameters Of The Sand Rotary Dryer

Note : this parameter just for reference , we also have other models machines , if you are interested in our equipments , please don't hesitate to contact me .

Photos Of The Industrial Rotary Dryer