Turn-key Project Sunflower Shell Biomass Wood Pellet Making Plant ,Output 5tph

Double Crane Brand MXLH-Type Biomass Wood Pellet Production Line Brief Introduction:

1. MXLH-Type Belt drive biomass ring die wood pellet mill is part of a hard wood pellet ring die pellet mill,

it is suitable to produce all kinds of biomass wood pellet production.Such as sawdust, crop straw (rice straw,

wheat straw, corn stalks, sorghum stalk, soybean stalk, cotton stalk, grape straw, peanut seedlings, and sunflower stalk), rice husk, grass powder, shrubs, wood branches, wood cut-off head, bamboo debris, bagasse, palm sawdust,rubber sawdust,.etc.

2.With compact structure, beautiful appearance, high output, low power consumption, easy maintenance, 

easy to operate, reliable work, etc.Automatic ring die lifting device easy to replace wearing parts.

3. This biomass pellet production line can produce wood pellet diameter from Φ6 or Φ8mm,to meet the 

needs of different users, and also can customize wood pellet diameter according to the user.

4. Adopt international advanced manufacturing equipment and processes of steel ring die,new design roller,

long use life, smooth to produce high quality wood pellet product.

5. This biomass wood pellet mill adopts frequency conversion motor feeder with pump lubrication system.

6. This biomass wood pellet mill have ring die lifting device,help customer replace the wearing parts easily.

MXLH-Type Complete Wood Pellet Production Line 5t/h Locate in Our Company Exhibtion Hall:

Complete set of wood pellet production line is designed for industrial production to make biomass pellets from any type of agro and forestry wastes with output from 1 ton to 20 ton per hour. The finished wood pellets are widely used for heating purposes of industrial boilers and large power plants as well as home use to alleviate the energy crisis and meet eco-friendly requirements.

Complete Set Of Wood Pellet Making Production Line Main Production Section:

1.Wood Pellets Production Line ----Raw materials Prepared---Wood Chipper

Wood Pellets is mainly made of any wood waste and biomass particles, such as wood sawdust, wood shavings, wood chips, wood logs, straw, rice husk, coffee husk etc. At a wood pellet plant, raw material need to be well prepared before pelletizing, then get dried, compressed, and formed into small eraser-sized bits, the wood pellets get from wood pellet plant are clean, pleasant smelling and smooth to touch,so first we need adopt wood chipper machine crush wood log into wood chis.

2.Wood Pellets Production Line----Crushing Process –Wood Hammer Mill

The hammer mill is a machine whose purpose is to crush materials by the collision between the high-speed hammer and materials through screen. Our SFSP And DG series wood chips or branch crushing machine is your best choice. It mill all kinds of wood raw material like tree branch, wood shavings, wood chips, wood block, cotton stalk, corn stalk, wheat straw etc, which size less than 50mm (diameter). After milled, the output size can reach diameter 3-5 mm, then it is pushed to next process to get dried and pelletized.

 After crushing process, the wood and biomass material need to be well conditioned on moisture before pelletizing. The best moisture content to pelletizing is about 14-16%. Our rotary dryer is made up of burning stove and main rotary dryer system which is high efficiency in drying the wood and biomass material. It use steam to heat air and contact material to remove certain degree of moisture. It is very important for wood pellet plant to using moisture detector which will determine the most suitable moisture before pelletizing.

4.Wood Pellets Production Line---Pelletizing Process - Wood Pellet Mill

Ring Die wood pellet machine is the heart of the biomass pellet machine production line. The Pellet machine is widely used in compacting of wood, straw, other biomass sources into pellet. Capacity ranges from 1T to 10T per hour. Our MZLH series pellet mill adopt SKF bearings from Sweden and NSK bearings from Japan, the motors in the wood pellet is from Siemens, high quality components make the pellet mill more efficient and durable. 

5.Wood Pellets Production Line ----Cooling Process - Pellet Cooling And Sifter Machine

After the pelletizing process, the temperature of the wood pellet is about 60-80 degrees Celsius, and the moisture content of the wood pellets is about 15%. A cooler must then be used to reduce the moisture content of the wood pellet to about 3-4%, thereby making the wood pellet easy to store. However, some customers said that the local climate is very humidity, they want to cool the wood pellets with moisture 7-8%. It is no problem, our new stabilizer combined cooler can do it well.By this section,we also use pellet sifter seperate dust in the pellet.

6.Wood Pellets Production Line----Packing Process - Pellet Packing Scale

After cooling process, the wood pellets will not directly enter into the fuel process, avoiding the wood pellet affected with damp, the packing process is very necessary. The packing process is effectively handled by our Full Auto Packing Machine,it can automaitc weighing wood pellet product in bag 25-50kg/bag,200-400bag/h,and then by sewing bag machine seal wood pellet product in bag,prevent moisture.

Main Machine Wood Pellet Mill Match Feed Conveyor And Lifting Device Picture Show:

MXLH Series Wood Pellet Making Machine Detailed Technical Data:

MXLH Series New Design Biomass Fuel Wood Pellet Mill Advantage:

1.Ring Die Mold upward,vertical feed sawdust:

This unique design can avoid sawdust be stuck in granulating room,conducive to heat dissipation. Ring die fixed,roller assembly roating,sawdust material centrifugal,enenly distributed around.

2.Belt and grear transmission,during working very stable: 

Super high efficiency motor drive belt pulley, have large inertia to drive roller roating,stable operation, nearly not vibration,easy to maintain,compare with gear drive,low invest and long useful life.

3.Independent automatic lubrication system:

Independent lubricate bearing and rollers,increase bearing service life and improve production efficiency,

reduce energy consumption.The roller assembly also have own grease tank,can install enough grease use

for more than 8h,double security ensure our wood pellet mill can work continuous 24 hours.
4.Siemens frequency conversion motor or domestic brand economical motor:

International warranty, long service life,for domestic brand motor,low invest,high returns.
5.SKF bearing or domestic Harbin brand economic bearing:

High precision, high speed, low noise, long service life,low production cost.
6.Granulating room cooling system: 

As the pelletizing process will generate high temperature, it will reduce the service life of die and bearing.By add blower and cyclone,this cooling system can avoid it happened.

7.Energy saving,high yield:

The biggest advantage is this type pellet mill only need very low power consumption,Such as MXLH-750 only need 90KW motor,can achieve a high wood pellet production capacity,customer test wood pellet production capacity 1.5-2t/h,this design will help user save production cost.

8.Indenpend ring die lifting device,Easy maintance and chance wearing parts:

Including wearing parts maintenance lifting device,so very convient to replace new ring die and roller assembly by lifting device,save labor and maintenance time.

Produced High Quality Wood Pellet Picture Show (Diameter 6 or 8mm,Length 3-4cm):

Full Set Of Wood Pellet Line By Full Container Packaging & Shipping Picture:

About Professional Service:
1.We devote to all-round service of all the products from design,offer,production,shipment to maintenance.
2.Our professional after-sales service include:free design,guidance,onsite installation,debugging and training.
3.After selling, we provide the warranty of one year and free technical guidance and spares parts supply.
4.If your equipments have any problems, we will help you to solve online or onsite in time.
5.Welcome oversea agents to join us expand internation market.Join Double Crane,Win Our Future!
6.Welcome to contact us for further cooperation information!

Biomass Energy Wood Pellet Machine Pass CE Certificate:

Double Crane Machinery Area 67000m² Office Building And Workshop Pictures Show:

Shandong Double Crane Machinery Manufacture Co.,Ltd. is located in economical and technological development zone,

Leling city,Shandong province,very close to the expressway from Beijing to Shanghai.Our company is the high and new technological enterprise dedicated to manufacture feed pellet machines and biomass pellet machines to worldwide users.

Sticking to the product developing ideas of simplicity,perfection,quality and innovation,we have been always focused on designing and manufacturing feed pellet machines and biomass pellet machines since the foundation in 2005.We had cooperated with domestic famous universities like Shandong University,Jinan University and Shandong Agricultural University in feed pellet production line and biomass pellet production line research and development since 2008.We had obtained more than 30 patents and successfully developed 8 series of products,including 60 different kinds of machines.

In the feed pellet industry ,we had achieved advanced level in man-machine design,functional design,automatic control

and user experience and became the professional pellet mill manufacturer in China.We have strong competitive advantages in feed production line with the capacity of 1-30 tph and biomass pellet complete line with capacity of 1-50tph.Until now,we had installed more than 1200 sets of machines worldwide.

In recent years,our company continuously increase investment.We had invested up to 60 million Yuan to build 19,200 square meters manufacturing base and 10 million Yuan for technological innovation,in-depth automatic and integrative technology development.These investments have greatly promoted the upgrading of the machines,offering best quality solutions for feed industry and biomass pellet industry.Double Crane Machinery is willing to become your partner with our high price-performance products,excellent quality and perfect after-sales service.

Join our company and win our future.

If you're interested in our equipment, please kindly reply us the following question:

1. What's the wood pellet mill production capacity do you want?

R:We can supply wood pellet mill or pellet mill production line with output from 0.2-20t/h.
2. What's your wood raw material situation? Size and Moisture.

R:Our wood chipper and hammer mill can crush all kinds of material into wood sawdusts,advise wood moisture <60%,by drum dry can control it moisture around 15-18%,it will suitable to press wood pellet.
3. What's the final wood pellet diameter do you want?

R:Our company wood pellet mill can produce wood pellet with diameter 6mm or 8mm,it also can design accordingto customer actual demand. 

4. What's your country industrial electricity voltage?

R:General standard motor in China work under 380V,50Hz,3Phase,if not match,tell us we can modify motor.

Welcome to contact Jack to Get detailed Design,Drawing and Offer: