Electric Paint Curing Oven

Specifications

Electric Paint Curing Oven

Berif Introduction:

Jiangsu Xintu Machinery Co.,Ltd is a professional powder coating equipment manufacturer located in Jiangsu province which is quite near from Shanghai , just about 40KM . we have turned into one specialized coating equipment manufacture company, combined with the whole ability of designing, production and trading . With more than 5 years' experience own-brands operating in local market and abroad , Jiangsu Xintu Machinery Co.,Ltd becomes the continuous leader of the upscale market of powder coating machinery.

1. COMPANY SCALE AND LARGE PRODUCTION ABILITY

Our factory covers more than 2 4000 square meters , and employs more than 200 hard-working workers . There are 10 production lines which achieve us more than 600 sets/month , or 8000 sets annual capacities.

2. ENTIRE PRODUCTION PROCESSES

The entire production processes including spray gun , coating machine production and assembly are all done by ourselves . This shortens the delivery time and decreases the cost for our customers .

3. COMPLETE PRODUCT SERIES AND MOST COMPETITIVE PRICE IN MAINLAND CHINA

If you want to find quality product with low price coating machinery , i think we will be you best choice . We have the lowest price on powder coating systems in the world . Also if you want to find some very durable and fasional design coating machine , we also would be your best choice . We have more than 40 research and development members . They wil lead the market and satisfy you requests .

4. RELIABLE QUALITY

Our company has been certified by the CE of European Union and the SGS of Made-In-China . We have been adopting the quality management system . More than 20 QC members are in charge of inspecting every component in the process of manufacture . In addtion , the return rate of our products is less than 0.5% per month .

Now our porducts are largely exported to markets of the whole world . Present and future , we are off the road , sincerely look forward to your participation and support .

specifications:

Electrostatic Spraying Process

1. Pretreatment

Objective: To get rid of the workpiece surface oil, dirt, rust and in the workpiece surface generating a layer of corrosion resistance and can increase the spraying coating adhesion "phosphating layer".

Main technological steps: In addition to oil, rust removal, phosphating and passivation. The workpiece surface after treatment before not only no oil, rust, dust and the original silver luster surface generating a layer of uniform and the rough is not easy to rust grey phosphating film and can increase the coating layer adhesion.

2. Electrostatic spraying
Objective: Powder coating evenly spray to the surface of the workpiece. The special work (including easy to produce electrostatic shielding position) should be using the high performance electrostatic spray molding machine to complete the painting.

Process steps:
Using electrostatic adsorption principle in the surface of the workpiece evenly spray on a layer of powder coating. Falling powder through the recovery system recovery and sieve used again.

3. High temperature curing

Objective: The workpiece surface of powder coating heating to the specified temperature and heat preservation corresponding time, melting, flow flat, curing.

Process steps: Spraying good workpiece push curing oven, heating to the predetermined temperature (usually 185 degrees) and heat preservation corresponding time (15 minutes). Blow on take out cooling namely get finished.

4. Decoration processing

Objective: Make after electrostatic spraying after the workpiece to achieve a kind of special appearance (all kinds of wood grain, decorative pattern, such as honor).

Process steps: Finish, transfer and treatment process.