JNC Used Motor Oil Re-Refining to Diesel and Petrol Fuel Machine

Be Part Of The Solution  

  Not The Pollution        

⇒ JNC Used Motor Oil Re-Refining to Diesel and Petrol Fuel Machine

WORKING PROCESS OF JNC Used Motor Oil Re-Refining to Diesel and Petrol Fuel Machine

JNC Used Motor Oil Re-Refining to Diesel and Petrol Fuel Machine can be used in different kinds of black engine oil,crude oil,plastic oil and shale oil,to get diesel and gasoline through distilled catalyst.

Pump the used oil into the heater,and heat it to its working temperature via coal or fuel oil,gas.

The maximum working temperature is about 410 degrees.

The required diesel and gasoline can be obtained after catalytic distillation.

When the reaction of used oil in reactor is complete,the machine will stop heating automatically,after that we can just remove the residue from the bottom of the tank and then it can be used again.

SYSTEMSOF JNC Used Motor Oil Re-Refining to Diesel and Petrol Fuel Machine 

Reaction tank:used oil will be pumped into this tank from the primary filter

Heating system: by burning coal or fuel we can work the oil temperature up to setting value.This system equips with insulation system as well.

Catalytic system: used oil reaches the expected temperature,via catalytic effect,and the gaseous hydrocarbons become gasoline and diesel compositions.

Cooling system: after the catalytic effect,the gasoline and diesel compositions will be condensed into liquid materials.

Temperature control system: to make sure the used oil transformed into gasoline and diesel.When the used oil is dried by distillation,it can stop heating timely.

Tail gas handling system: through tail gas system,a small amount of unliquefied gas left can meet emission standards.

THE RECOVERY OUTPUT RATE BY JNC Used Motor Oil Re-Refining to Diesel and Petrol Fuel Machine 

Diesel:  86%-88%

Gasoline:  5%-6%

Oil Residue:  6%-8% ( which can be used as bitumen,the raw material for cement and bricks or heating fuel just as coal,after being cooled off to normal temperature )

REFINED OIL COMING OUT AFTER BEING PROCESSED BY JNC Used Motor Oil Re-Refining to Diesel and Petrol Fuel Machine 

MAIN BENEFITS AND ADVANTAGES OF JNC Used Motor Oil Re-Refining to Diesel and Petrol Fuel Machine 

1 Working principle: used oil under the action of catalyst distillation gets high quality diesel and gasoline directly.

2 No need of acid,alkali,or activated clay to refine the final diesel, just use our plate-and-frame filter( carried with JNC) to remove the impurities.

3 The operating method of JNC Used Motor Oil Re-Refining to Diesel and Petrol Fuel Machine is Directly heating with fuel or gas, which is safe, convenient,and practical practical.

4Environmental friendly: It is completely sealed while running JNC Used Motor Oil Re-Refining to Diesel and Petrol Fuel Machine,so it won't release any harmful gas to human and the environment.

4 The total cost of processing used oil is only USD22 per ton (including fuel, electricity and catalyst cost).

5 Oil Ouput Rate: diesel 86%-88%,gasoline 5~6%,oil residue 6~8%.

6 Different from other equipment on the market: for JNC Used Motor Oil Re-Refining to Diesel and Petrol Fuel Machine,we use a special way of heating with high thermal efficiency so that it doesn't form carbon deposition easily, which greatly reduces your maintenance costs.

7 Currently on the market, the distillation is based on coil heating, due to the temperature which can't meet the technical requirements, the oil yield only achieve to 65%.

This kind of heating mode will make it easy to scale. More importantly, it needs high temperature pump which is expensive and easily breakable. These weaknesses mean you need high cost of frequent replacement after.

8 JNC Used Motor Oil Re-Refining to Diesel and Petrol Fuel Machine is safe to operate, reliable and very durable. And it's easy to operate and low on labor intensity, only1-2 workers are enough to make the machine work.