Odorless Interior Emulsion Wall Paint White Latex Wall Coating

Apply to:

Can be applied in the following places: family (living room, bedroom, study, baby's room metope, smallpox, etc.), nursing homes, hospitals, nursing homes, apartments, kindergarten, office, themes, clubs, upscale hotels, holiday hotels office buildings, restaurants, etc.

Material standard:

Construction methods:

Construction steps:

• Roll the alkali primer,ensure to cover all the wall surface to prevent the Alkali medium revealing.
• Putty the acrylic emulsion paint main material,before it is half dry to polish it;
• Putty the acrylic emulsion paint again, after drying the surface,to polish like a mirror.
• For rich texture,may put a little on the surface again,then polish.
• If want to hight light the surface, may scrape a layer of waxy. Reference dosage: 1.5-2m²/kg.

1.What kind of problems will face in paint application?

Paint applications are prone to the following questions:

Peeling Off: This is the use of low-grade putty, causing poor adhesion of paint peeling off the wall;

Bulbing: wall was not completely dry, water evaporating or within the walls of the film causing drumming;

Chalking: wall loose, excess water or when the temperature is below the application requirement;

Crack: wall (or substrate) cracking, is by the use of poor quality putty;

Fade: the wall was not full dry, and the wall was too alkaline, mainly caused by paint quality problem

2.What are the advantages and disadvantages of using brush or roller?

Brush is the first and easiest method of painting, for painting objects of any shape, the disadvantage is inefficient, labor-intensive, general decorative properties. Roller in the other-hand is suitable for large-scale construction, high efficiency than brushing, but somewhat less decorative.

3.How to apply effectively by using a roller?

Brush dipped in paint no more than half of the brush hair, and if the brush roots stained paint, paint brush will be deformed, brush life will be shortened. Stained paint brush paint brush before the inner surface of the container must apply onto it, so as to remove excess paint dripping paint to the ground. Should start brushing paint brush vertically as far as possible, with the bristles brushing the abdomen, in the last rationalize paint brush over paint when received, will brush flatly, brush lightly with the tip of the bristles.

4.How to deal with old interior wall refurnishing?

Be sure to use the tool to eradicate the entire old, mutilated old paint surface. For complete old paint surface, use yarn polished smoothly. If it stick wallpaper and maintained a good surface condition, you can also be directly brushing paint. When brushing, to different climatic conditions and brushing tools, dilute with small amount of water.

5.How to paint new interior wall?

The new wall must be fully dried; the surface moisture should be less than 10%. You can use putty to the wall batch level. In order to make the film firmly smooth, color durable, require the use of water-based or oil seal wall paint primer.