Pro-arch roof/arch panel roll forming machine

Pro arch roof/arch panel roll forming machine is invented by our Pro roll forming machine Co., LTD. 

 Normal type is roll forming part and bending part seperated, but our type is two parts integration. 

Its advantages are more convenient for workers' operation and less necessary workers  (as empoly one worker is too expensive.)

Welcome you contact with us if you are interested on our machine! 

Brief introduction of our machine:

Pro-610/240

Dimension : 8900mm X 2230mm X 2300mm (Single axle & 4 tires)

Total Weight : About 8 Ton

Bending Leaf : 10mm thickness, processed by CNC

Cutting blade : 12CrMoV material, Heat treatment

Cutting type : Mechanical Cutting

Forming type: Roll-formed and length-set cutting.

Total motor power : 17.5KW

  Main Motor Power : 7.5KW

                       Bending Power : 3.0KW+1.5KWx2

                 Cutting Power : 4.0KW         

Seaming Power: 1.1KW+1.1KW

Roller Material : 45# high-quality steel, quenched HRC 55~65, hard chrome plating.

Shaft Material : 45# high-quality steel, galvanized

Bearing : Made in Harbin

Stand of molding : 13+1

Rolling material:  Width : Feeding width : 914mm    

                       Effective width : 610mm

                Using rate : 66.7%

                Thickness : 0.8-1.5mm

Working Speed : Forming Part : 15m/min

                            Bending Part: 13m/min

                            Seaming : 16m/min

Suitable Span : 6~40m

De-coiler : Inner-diameter of coil : 450mm ~ 650mm,

          Max width of coil : 914mm ~ 934mm      Load : 10Ton

Container: 1x40'HQ can load one machine with its accessories