Multi core XLPE insulated PVC Sheathed armored CU/XLPE/SWA/PVC Power Cable

This product is applicable to being fixedly laid on the transmission and distribution line of alternative current rating 50Hz and rated voltage up to 0.6/1.0Kv with the use for power transmission, which is applied to the range of distribution network, industrial equipments, etc.

This product is normal used cable, not suitable for some special situation, such as aerial, underwater, ship, sea, nuclear station, etc.

1.Power cable - the armored power cable is made complying with the national standard and have pass the CCC (China Compulsory Certification) which contains the recognization of national security certificate (CCEE), imports of safety and quality licensing system (CCIB), China Certification Electromagnetic Compatibility (EMC).

2. the temperature of the conductor in the working time is no more than 70 ^oC

3. The specification: YJV,YJLV,YJV22

4. The rated voltage is 0.6/1 KV

5. The core count* the sectional area of the conductor(mm²)

(We can also customize the electrical wire and cable as your request! You can decide the core count and cross section of the conductor, as well as the jacket and insulation.)

Advantages

1. IEC, ASTM, DIN, BS standard

2. ISO9001,ISO14000:2004 ,CCC,CB ,ROHS,MA,CRCC,TUV, certification

3.Professional QC inspection

4. OEM Service Available

5.Response within 24 hours

6.Free Sample

Applications

Laying indoors and outdoors. Able to bear certain traction during installation, but not external mechanical forces. Laying single core cable in magnetic ducts is not allowed.

Standards

International: IEC 60502, IEC 60228

China: GB/T 12706.1-2008

Other standards such as BS,DIN and ICE upon request

Technical data

Rated voltage: 0.6/1kV

Max. Conductor Temp.: normal (70°C), short circuit no more than 5 s (160°C when section-area below 300mm², 140°C when section-area above 300mm²)

Min. Ambient Temp.: 0°C, after installation and only when cable is in a fixed position

Min. Bending Radius: 20 x cable O.D

Certificates

CE, RoHS, CCC, KEMA and more others at request

Applications:

Used as an interconnecting cable in signal and control equipment – for measuring, control or regulation

Standards :

IEC60050:1984

Using Features :

The highest working temperature of conductor is 70oC

The temperature fot laying cable should be not less than 0oC

The bending radius of the cable:unarmoured cable,should be not less than 8times of diameter;armoured or copper tape shield cable,should not be less than 12times of diameter