Preform Hand-Feed Pet Stretch Blow Molding Machine Dbh1000-2

This model could blow normal PET bottles.
Advantages: preforms feeded by hand and bottles heated and blowed automatically; no technical requirement from this worker; hourly capacity from 1400 to 2000pcs; lower cost than usual automatic machines while enjoying stable performance.
Technical parameter

1.High pressure air compressor  CWM-1.58/30

• Main technical data

Motor power: 2*18.5kw/2*25hp
Running speed: 870
Air consumption: 3.04M³/min
Working pressure: 4.0Mpa
Machine dimension: 2200mm*1500mm*1850mm
Weight: 1500kg

2.Combined air cleaner(including air dryer, air tank & air filter)  TCLF(Z)-2.0/30

• Main technical data

Air-treated capa.: 2.0M³/min
Working pressure: 3.0Mpa
Entrance temperature: <=80^oC
Power: 0.75HP
Air receiving tank: 0.3M³
Package measurement: 1900mm*950mm*1900mm
Gross weight: 550kg
 
3.. Low pressure air compressor  CW-2.0/10

• Main technical data

Motor power: 15kw/20hp
Running speed: 890
Air consumption: 2.0M³/min
Working pressure: 1.0Mpa
Machine dimension: 2000mm*1050mm*1900mm
Weight: 780kg
 
4. Air dryer  TCLF-2.0/10

• Main technical data

Air-treated capa.: 2.0M³/min
Working pressure: 1.0Mpa
Entrance temperature: <=80^oC
Power: 0.75HP
Package measurement: 1050mm*650mm*1100mm
Gross weight: 120kg
 
5. Chiller  XC-03ACI

• Main technical data

Cooling capacity: 6800kcal/h
Compressor power: 2.5kw
Refrigerant: R22
Chilled water pump power: 0.75kw
Max flow rate of chilled water: 55L/min
Max pressure: 9m
Flow water inlet and outlet pipe: 1.0''
Cooling fan power: 0.25kw
Over all dimension: 1030mm*680mm*1270mm
Water tank capa.: 53L
Weight: 210kg