high quality industrial beer brewery equipment for sale

Our company is a private enterprise integrating with R&D, processing and engineering installation which is specialized in manufacturing of beer brewing equipment.

• Available with polished stainless steel brewhouse vessels
• Available with steam heating
• Modular brewhouse design, available either in a 2-Vessel version (brewkettle/whirlpool and mash/lauter tun, shown above), or 4-Vessel version with separate brewkettle, whirlpool, mash tun and lauter tun.
• Optional hot and cold liquor tanks are also available

Brewing is typically divided into 9 steps: milling, malting, mashing, lautering, boiling, fermenting, conditioning, filtering, and filling.  

The mashing-lautering-boiling-whirlpool take place in the brewhosue, turn the malt into wort.

In order to provide the one-stop service, we could help you purchase the yeast, hops and other related raw materials for you.

Beer brewing equipment production power and Equipment covers an area of analysis:

Standard feature:
*Stainless steel material 304/316
*Exterior thickness: 1.5~3.0mm
*Interior thickness:2.5mm~4.0mm
*Exterior: stainless steel/luxury red cooper
*Flange&dish head(single/double head)
*Temperature sensor
*Top manway
*Polyurethane 80~100mm
*Rotary cleaning ball, 360 degree no dead coner
* Hot water tank available&optional

Mashing tun

TBE mash tuns are insulated to maintain a constant temperature.Steam jacket design will allow The TBE systems are designed to do both decoction mashing and infusion mashing. The mashing tun/kettle is made out of stainless steel or copper.

Lauter tun

The lauter tun is used for filtering and clarifying the sugar liquid (called wort) out of the heated water-malt mixture (called mash) that comes from the mashing tun.The lauter tun typically has the same capacity as the cooking tun and can also be made out of stainless steel or copper cladding.

Boiling Kettle

After lautering, the beer wort is boiled with hops(and other flavourings if used) in a large tank known as a brew kettle. The boiling process is where chemical and technical reactions take place. 

Whirlpool Tun

At the end of the boil, the hopped wort settles to clarify in a vessel called a "whirlpool" where there is a tangential inlet of wort.Whirlpool can happen in the kettle because there is no obstacle inside the kettle.

Hot water tanks

Hot water tanks, called liquor tanks in a brewery, are buffer tanks that contain hot water that will be used to sparge the grain bed during lautering to extract a maximum of sugars out of the malt.

Cold water tank

Cold water tanks, or cold liquor tanks as they are called in the brewery, are buffer tanks that contain cold water that will be used to cool the bitter wort down to a fermentable temperature range after boiling. 

2 vessel, 3 vessel, 4 vessel also availble, depend on your demands. 

Process: mirro polishing, pure argon gas protecting welding, double face forming

Panel:Mirro/wire-drawing/2B optional

All pipelines and valves use food grade stainless steel 304 material

1)      SL-Tank has cone angle between the bottom 60-90 degrees, 70 degrees is best conducive to yeast sedimentation and emissions.

2)      SL-Tank has a cooling jacket or coil pipe to meet the cooling requirements of the process.

3)      SL-Conical tank is closed tank, the carbon dioxide can be recovered, the carbon dioxide can also be washed; the fermentation tank can also be as storage tanks.

4)      In order to reduce the cost to build, and more conical fermenter set in the open air, so there is good fermentation tank insulation. Polyurethane insulation materials commonly used in insulation layer thickness of 70-100cm.

Bright beer tanks optional & available:

Quality auxiliaries and accessories:

Professional R&D engineer team:

Catalogue:
Full set beer brewery:
Home brewery: 50L,100L pilot/home beer brewery
Commercial brewery: 100L, 200L, 300L, 500L, 1000L, 3BBL, 5BBL, 7BBL, 10BBL pub/restaurant, micro brewery plant
Large brewery plant: 1000L, 2000L,3000L,5000L, 10BBL,15BBL, 30BBL brewery plant

Brewhouse:100L~5000L, mash tun, lauter tank, kettle/whirlpoo tank
Fermentation: 100L~10000L conical fermenters, unitanks, conditioning tank
Bright beer tank: 100L~10000L serving tanks, BBTs
Beer selling: beer tower, beer selling tank, stainless steel beer kegs, keg filling, keg washing, bottle filling, bottle washing, capping machine and etc.

Trade Remarks:

Payment: T/T, or through alibaba Trade Assurance

Trade terms: EXW/FOB/CIF/CFR negotiable

Delivery: by ocean to the discharging port, LCL or FCL

Our equipment is well designed by professional designer, and adjustable according to your request. The best material is used to product your machine. The equipment is carefully packed before delivering.

1. LCL/FCL(20GP/40GP/40HQ)
2. packed with plastic film in fumigation free wooden case or fixed with iron frame
3. up to export standard, suitable for delivery
4. customer's requirements available

We ensure every order will not live up to the customers' requirement. Every order will be check by the professional skilled engineer before shipping.

We Serve:

-Customized capacity&configurations proposal list
-CAD/3D layout drawings
-Technical drawings of the equipment
-Engineer going abroad for installation, debugging and technical training
-Main guarantee for three years, life long service