mash tun equipment for complete beer brewing system

our advantage:

1. The unite can meet the wort production requirements of self- made beer bar and can complete the whole process from grinding of raw material, material feeding, saccharification, wort filtration, boiling, settling and cooling to the final oxygenation.

2. The whole equipment are made of high quality stainless steel which meets the international and national hygiene and safety standards.

3. There are two heating methods: steam heating and electrical heating

4. Saccharification filtration tank is equipped with variable frequency mixer which can achieve the exchange of rotating speed from 50r/min and meet the requirements of rotating speed for saccharification mixing and filtration tank mixing.

5. Operation and control are achieved by automatic control or semiautomatic control with computer industrial control system.

6. Input and output of material and self- circulation are connected by sanitation material pump and hose and the cleaning adopts CIP cleaning tanker and hose connection to achieve self-circulation cleaning.

7. Connection type of pipelines for requirements is quick assembly which is convenient for cleaning, maintenance and repair during production.

8. Reasonable design, delicate, process,nice appearance,durable service, easy for operation, repair and maintenance. 

Note: 1hl=100liter; 1Gallon=3.7854liter; 1Barrel (BBL) =117Liter;

Standard feature:

Mash/lauter tank: used for mashingin, lauter, recirculation, and sparging.
*Stainless steel material 304/316
*Exterior thickness: 1.5~2.0mm
*Interior thickness:2.5mm~3.0mm
*Flange&dish head
*Polyurethane 80~100mm
*Rotary cleaning ball
*Recirculation with sight glass
*Coned bottom
*Raker knife with variable speed drive
*False bottom
*Ring of sparging
*Temperature senser
*Separate mash tun, lauter tank available

Kettle/whirlpool tank:used for boiling and whirlpool of the wort
*Stainless steel material 304/316
*Exterior thickness: 1.5~2.0mm
*Interior thickness:2.5mm~3.0mm
*Stainless steel heating jacket, both on the bottom and around the side
*Flange&dish head
*Spray cleaning ball
*Temperature senser
*Equip with agitator
*Condenser device
*Separate kettle, whirlpool tank

Optional:

3-vessel: mash tun-lauter tank-kettle/whirlpool tank
mash/kettle tank-lauter tank-whirlpool tank(combination type optional)
4-vessel: mash tun-lauter tank-kettle-whirlpool tank

Hot water tank, Screw conveyer, Grist case optional
Process: mirro polishing, pure argon gas protecting welding, double face forming
Panel: Mirro/wire-drawing/2B optional

Standard features of the fermenters/unitanks/CCVs:

Conical bottom, cylindrical top, stainless steel 304 double walled jacket tanks

Bottom cone 60 degree, allow the yeast to flow towards the cone's apex

Compression resistance design, design pressure 0.3Mpa, working pressure 0.15Mpa

Stainless steel cooling jacket

Both the tank and the jacket will have 48 hours pressure test&inspection

Stainless steel legs(3 or 4), with screw assembly to adjust leg height

Dry hops adding port, racking arms optional

Stainless steel ladders for large tanks

All relative valves: pressure regulating valve, safety valve, sampling valve, drainage valve food and sanitary grade stainless steel 304 material

Single tank, single control  

1)      SL-Tank has cone angle between the bottom 60-90 degrees, 70 degrees is best conducive to yeast sedimentation and emissions.

2)      SL-Tank has a cooling jacket or coil pipe to meet the cooling requirements of the process.

3)      SL-Conical tank is closed tank, the carbon dioxide can be recovered, the carbon dioxide can also be washed; the fermentation tank can also be as storage tanks.

4)      In order to reduce the cost to build, and more conical fermenter set in the open air, so there is good fermentation tank insulation. Polyurethane insulation materials commonly used in insulation layer thickness of 70-100cm.

Complete beer brewery equipment description:

We can supply 50L,100L, 200L, 300L, 500L, 1000L ,2000L,3000L,5000L,10000L and so on capacity beer brewing equipment.

Tell me your specifications and I will customize for you acccording to your requirements.

Professional Pre-service:

1. We can supply design service free according to customers’ request.

2. We can supply budget assessment service upon our many years’ experience.

3. Customers are welcome to come to our plant base to visit and inspect, and we would like to give a warm reception.

Sound After-service:

1. Our brewmasters or engineers are available to supply service at buyers’ appointed places.

2. We will give timely effective instruction about application of equipment as best as we can.

3. We supply turn-key project.

We are your partner throughout the entire brewery development process. We will be as involved as you are comfortable with; it's an honor to be a part of your team. Always at your fingertips - you can count on us for solutions, not just some tanks and pipes.

Trade Remarks:
Payment: T/T, or through alibaba Trade Assurance
Trade terms: EXW/FOB/CIF/CFR negotiable
Delivery: by ocean to the discharging port, LCL or FCL

If you have any questions, please feel free to contact me to confirm. You will get timely professional reply within 24 hours.