Line Splicing/GALVANIZED STEEL ARMOUR RODS

Specifications

line splicing/GALVANIZED STEEL ARMOUR RODS

Characteristics

1.For a single wire material, whether it is damaged or continue, preformed line splicing section 100% recoverable mechanical strength, and the length of the connecting wire inside can greatly improve conductivity.

2.For ACSR for repair were not damaged, steel core, wire aluminum wire connecting section can be restored to 100% strength and 10% of the steel core strength, and the installation of wires within the article follow, lead performance greatly improved .

3.If the steel core damage, please select the article follow the whole tension.

Consideration

1.For ACSR, conductor splicing can restore the strength of aluminum wire, but can not restore the strength of steel core, there are signs of damage when the steel core, the selected article follow the whole tension.

2.All the wires, whether used or not, the installation of wires splicing shall be thoroughly cleaned before they are polished to remove oxide layer to expose the gloss. Before installing the product must be of high quality, and the lead wire to match the surface of lipid coated wire.

3.Preformed line splicing is designed for special occasions and can only be used once,  not under any circumstances re-use.

Preformed line splice(ACSR)

Preformed line splice(Aluminu wire)

We could design and change according to our customers' requirements,for more information,please contact us freely.

New paremeter:

TOLERANCES: LENGTH:-10/+20mm. DIAMETER OF THE RODS: ±0.04mm

RAW MATERIAL :GALVANIZED STEEL

Be used for steel cable, strand